An FCIP between two sites with MDS directors was successfully implemented. Dual FCIP links
were connected between the two geographically separate sites. The customer was running a
highly available IP network utilizing the HSRP protocol between their ingress/egress routers.
Recently a network event caused the customer IT Networking team to change the IP load
balancing/HA configuration from HSRP to VRRP. Since making the change the FCIP links have
either been down, or worked only intermittently. Why would the change to the IP load
balancing/HA configuration cause this behavior?

ControlCenter was upgraded to version 5.2. When discovering switches from SAN Manager, all of
the switches were found with the exception of two M-series switches located in a different facility
using a different Service Processor. What may have caused the problem?

Refer to the Exhibit.

The customer has just created an iSCSI environment (see diagram). All
users are now experiencing poor performance. Which option will improve performance?

Refer to the Exhibit.

The customer added a new iSCSI server to the MP-1620M. They can not
access the storage array on IP address 10.5.19.9. The customer’s network is setup for Fast
Ethernet. Please see exhibit. What is the issue?

Refer to the Exhibit.

Six I/Os arrive at disk director together. The inter-arrival time is 0. The
disk controller is servicing one I/O at a time. The exhibit displays information relevant to average
response time. What is the average response time?

Customer requires static SAN routing to manage the multiple links between their SANs. Which
Connectrix B-series policy allows static routing?

The customer wants to migrate data from Symmetrix to CLARiiON. What does EMC recommend
to perform the copy?

A customer has a Solaris host connected to an edge switch in a fabric. Storage is connected to the
core. The customer is using Open Trunking on the switches to balance I/O loads across the ISLs.
Occasional CSI Transport Errors?are appearing in /var/adm/messages. What is the cause?

Customer has implemented HP-UX Campus Cluster using MC/ServiceGuard. They are having
problems getting the cluster nodes to start. What do you do to fix the problem?

Refer to the Exhibit.

What is the calculated cost from host to storage, in the diagram, if a link
fails in a port channel group?