Which configurations can be added to this pool?
Your customer needs to add additional capacity to their existing FAST VP which currently contains four Flash drives in a RAID 5 configuration.
Which configurations can be added to this pool?
Which protocol should be used to connect the servers to the storage array?
Your customer has two clustered SQL servers that require direct access to LUNs located on their VNX storage array.
Both servers are located in the customer’s main office. The VNX storage array is located in the customer’s data center, which is approximately 1.5 km from their office. Both facilities are interconnected using their existing IP network.
Which protocol should be used to connect the servers to the storage array?
How would you bring the customer into compliance with EMC best practices with minimal impact?
Your customer’s IT group configured a VNX array and created multiple RAID 5 (2+1) RAID Groups. They just realized their mistake and bought new drives.
How would you bring the customer into compliance with EMC best practices with minimal impact?
What are the possible ways for RecoverPoint to notify the customer of an event?
A customer configuring event notifications in the RecoverPoint Management Application. What are the possible ways for RecoverPoint to notify the customer of an event?
What is the first step of the change?
A customer has four RPAs, two on each site, and total of 100 CGs. They want to change the DNS domain on their RPAs. They want to avoid any disruption to the running CGs with a minimum number of steps. What is the first step of the change?
How is that data distributed (numbers are approximate)?
Click on the calculator icon in the upper left-hand corner. A customer has a heterogeneous pool with the following configuration:
– 800 GiB of Flash, with 300 GiB free
– 12,000 GiB of SAS, with 2,000 GiB free
– 50,000 GiB of NL-SAS, with 25,000 GiB free
The customer creates a new LUN with data placement policy set to “highest available tier”. The LUN is then populated with 600 GiB of data. How is that data distributed (numbers are approximate)?
How will that data be distributed (numbers are approximate)?
Click on the calculator icon in the upper left-hand corner. A customer has a heterogeneous pool with the following configuration:
– 1000 GiB of Flash, with 400 GiB free
– 10,000 GiB of SAS, with 2,000 GiB free
– 80,000 GiB of NL-SAS, with 20,000 GiB free
The customer creates a new LUN with data placement policy set to “auto-tiering”. The LUN is then populated it with 500 GiB of data. How will that data be distributed (numbers are approximate)?
What must you consider before restoring the volume?
You have configuredreplicationusing CLR. After a failure, you decide to restore production from a point-in-timeimage of the local CDP copy. What must you consider before restoring the volume?
What must be done to allow this?
A customer has a large ESX 3.5 environment and they want to use RecoverPoint to replicate volumes to another ESX 3 5 site as a DR solution. What must be done to allow this?
Whatwillbe the result for this CRR consistency group when the parameter*Perform fast first-time initialization
Refer to the exhibit.
Whatwillbe the result for this CRR consistency group when the parameter*Perform fast first-time initialization*is set,andthe CG enabled forthe first time?