A customer has ordered a new VPLEX, and you are on site doing the initial installation. When
creating metadata volumes for the VPLEX Local configuration, the customer asks you how much
total storage is needed for the VPLEX metadata. According to EMC best practices, what is the
total minimum storage needed for this configuration?

You are zoning a dual-engine Local VPLEX cluster to a Symmetrix array to see LUNs 0010 and
0020 for metadata backups.
How many directors in the cluster must be zoned and masked to these LUNs?

A customer has purchased a dual engine VPLEX Metro cluster. During installation, there are not
enough free SAN ports to connect all WAN-COM ports to the SAN. What is the recommended
approach?

What is the EMC best practice for the optimum number of back-end storage paths per director
presented to a LUN?

When configuring a RAID-1 logging volume, what flags must be used in the command line?

What is EMC’s best practice for fault tolerance when zoning a VPLEX Metro together over fibre
channel for successful communication between the sites?

During the installation of a small VPLEX Metro, the command ‘configuration continue-systemsetup’ is issued. What is accomplished by this command?

You need to claim storage that is presented to VPLEX from a VNX. What is required in order to
create the mapping file needed by the VPLEX Claim Storage Wizard?

When performing an installation you notice DHCP has set your Management Server subnet mask
to 255.255.255.252. Based on EMC best practices, what is the appropriate subnet mask value for
Management Server network 128.221.252.0?

After registering Cluster-2 with ESRS during a VPLEX Metro cluster build, what is the next step to
perform before the cluster is successfully built?