A customer is implementing an Etherchannel environment. They are concerned about the how the

VNX will handle the traffic load distribution.
What is used by VNX to distribute the traffic?

A customer plans migrate several Exchange 2010 databases to a new RAID 5 storage pool on an
EMC VNX. The VNX has the FAST Cache and FAST VP enablers installed. Exchange 2010 is
installed on a vSphere guest.
What performance best practice should be considered when migrating Exchange 2010 to the
storage pool?

Exchange 2010 has been installed on a virtual machine using RDMs in physical mode. What best
practice should be followed when using Replication Manager with Exchange 2010?

An implementation engineer installs a DR solution to protect ten CIFS servers at site A. VNX
Replicator will be used to replicate these servers and their shares from Site A to Site B.
How many Virtual Data Movers should be configured for the servers to be protected on Site A to
ensure maximum portability?

A customer is testing their new MirrorView/A configuration between two EMC VNX. What will be
the state of a newly created mirror after it is added to a previously synchronized Consistency
Group?

A customer runs Oracle using DAS. They observe intermittent Oracle performance degradation
due to data hot spots on the disks. You propose they move Oracle to an EMC VNX with RAID 1/0
LUNs. If the customer implements the proposed configuration, how would Oracle ASM alleviate
the customer’s hot spots?

Refer to the exhibit.

During an Incremental SAN Copy bulk copy session, on the Source LUN, data blocks A, B, C, and
D are all transferred to the Destination LUN. Before data block E can be sent to the Destination
LUN, data blocks B and E are updated and become data blocks B` and E`.
What data will be shown in the Transfer DeltaMap, Tracking DeltaMap, and Destination LUN once
the start copy session is complete?

Refer to the exhibit.

During an initial synchronization of a MirrorView/A mirror, the Primary Image data blocks A, B, C,
and D are all transferred to the Secondary Image. Before data block E can be sent to the
Secondary Image, data block E is updated and becomes data block E’. What information will be
shown in the Tracking DeltaMap, Transfer Deltamap,and Secondary Image once the initial
synchronization is complete?