Which tab shown is most useful troubleshoot this issue?
What should the engineer do to automate this monitoring…
A customer needs to monitor their database volumes to make sure the storage capacity does NOT exceed
the desired limits.
What should the engineer do to automate this monitoring for the database volumes?
When does a customer need to update QoS node settings?
A customer has replication configured between its primary and DR sites.
When does a customer need to update QoS node settings?
What should the engineer do to prevent Tier 1 storage f…
An engineer needs to perform a data migration.
What should the engineer do to prevent Tier 1 storage from filling and causing poor performance?
Which page(s) are deleted?
Which technology best meets these requirements?
A customer has multiple Storage Centers at their main site and a DR system at a remote site. A particularly
important volume requires High Availability protection. An outage on one system at the main location must
NOT cause data to be inaccessible. Disaster Recovery protection is also required to protect data even if the
entire main site goes down.
Which technology best meets these requirements?
Which customizable, proactive tool should be configured…
A customer has a newly installed storage array. The customer needs to proactively monitor and report
storage utilization on a regular basis.
Which customizable, proactive tool should be configured to perform this task?
Which port mode should the engineer use to meet this re…
An engineer is configuring fault domains and front-end IO ports on a dual controller storage array. Any
volumes that are later created and mapped to a server must be active/optimized on one controller and
standby on the other controller.
Which port mode should the engineer use to meet this requirement?
How many targets and initiators should each zone includ…
A zone must include at least one target and at least one initiator.
How many targets and initiators should each zone include according to recommended best practice?
What are two 1 Gb iSCSI best practices to set up and-to…
What are two 1 Gb iSCSI best practices to set up and-to-end connectivity (servers, switch, and storage)?
(Choose two.)