what 802.11n features (from the numbered list below) ar…
To achieve a 450 Mbps MCS, what 802.11n features (from the numbered list below) are required?
1. Frame aggregation
2. Short GI
3. 40 MHz channels
4. 2 spatial streams
5. 3 spatial streams
6. Transmit beamforming (TxBF)
what scenario is possible when your company’s employees…
Given: As the wireless network administrator for XYZ Company, you are planning to upgrade your aging
wireless network infrastructure, as well as some clients, to support 802.11n. In your research, you have
discovered that your new wireless client devices and infrastructure are 802.11n, WMM, and WMM-PS
certified by the Wi-Fi Alliance. Some of your existing client devices are 802.11a/b/g devices that do not
support WMM.
Given this information, what scenario is possible when your company’s employees begin using both types
of client devices on the new WLAN?
What will result from this design strategy?
As an implementation engineer, you have just received initial design specs from a network designer for your
dual-band 802.11n deployment. The network design documents prescribe the following data rate
configuration for the 2.4 GHz radio:
Basic Rates — 5.5, 6, 11, 12 Mbps
Supported Rates –9, 18, 24, 36, 48, and 54 Mbps as well as MCS 0-15
What will result from this design strategy?
What is the maximum MCS rate that could be supported by…
Given: The 802.11n APs you have selected for your public access deployment support many of the PHY
and MAC enhancements offered by the 802.11n standard. The AP is single-band (2.4
GHz) and only allows 20 MHz channels. The WLAN radio in the AP is a 3×3 802.11n chip that supports two
spatial streams.
What is the maximum MCS rate that could be supported by this AP?
What application matches this description?
As you plan a WLAN upgrade, you have assessed the network requirements and data signatures of your
applications. One of the popular applications used on your network requires high bandwidth and low to
medium Wi-Fi loss, but can tolerate moderate latency and jitter.
What application matches this description?
What VoWiFi implementations require multicast packet de…
Given: Assume that music on hold (MOH) features are unicast only.
What VoWiFi implementations require multicast packet delivery support by the WLAN infrastructure?
Which of the following is NOT a valid reason for specia…
Multicast video applications typically require special treatment on the Wi-Fi network due to the nature of
multicast traffic. Many vendors implement proprietary multicast-to-unicast conversion for this reason.
Which of the following is NOT a valid reason for special unicast conversion of downlink multicast traffic?
which type of antenna are shown in Exhibit 1?
what is true of the EAP properties shown in the exhibit?
what 802.11n enhancements should NOT be enabled on the …
In a manufacturing facility with highly reflective materials, you are planning an upgrade to your existing
802.11b solution. You have chosen a dual-band 802.11n infrastructure product for this purpose. Your client
applications include:
Handheld scanners — for inventory management
Toughbooks (laptops) — mounted on forklifts for inventory and workflow management
VoWiFi phones — used by select employees throughout the facility
You are evaluating all of the 802.11n enhancements and determining which features to enable for your
environment and applications.
In this scenario, what 802.11n enhancements should NOT be enabled on the 2.4 GHz radio of the new
APs? (Choose 2)