Which of the following is the MAXIMUM storage capacity of a dual-layer Blu-Ray disk?

An administrator has built two storage arrays for a BCDR solution. Each array is in a different
datacenter and each datacenter has its own SAN. The SANs will be directly connected to one
another via long-wave SFPs. Which of the following cable types should the administrator use to
facilitate connectivity?

An administrator has just installed a brand new HBA into a host and needs to connect that host to
the SAN. Which of the following connector types should be used?

An administrator is troubleshooting a server that is intermittently losing access to its disk down a
single path. The connected switch port has a lot of errors. The host HBA has appropriate firmware
and drivers for its configuration. Which of the following is the MOST likely cause for the recurring
issue?

In an FCIP environment where data replication is occurring between two FC SANs communication
errors are becoming persistent, and occasionally the link drops. Which of the following would a
technician use to monitor and determine when link drops occur?

Which of the following distances is supported for 50 micron multimode cable for 4 Gb/s Fibre
Channel?

A server administrator reports a lot of SCSI transport errors and retries on one server. Which of
the following methods, on the Fibre Channel switch, would display these errors?

A company has two data centers, 25 kilometers (15.5 miles) apart. Data is replicated from the
primary to the secondary site using a method that commits data to storage at both sites before the
write is acknowledged to the host. This is BEST described as which of the following?

When a single Fibre Channel port can be configured to represent multiple virtual devices on the
same physical port, it is known as which of the following?

VSAN/Virtual Fabric can BEST be defined as which of the following?