DRAG DROP
Wireless network users recently began experiencing speed and performance issues after access point 2 (AP2)
was replaced due to faulty hardware. The original network was installed according to a consultant’s
specifications and has always worked without a problem.
You a network technician, have been tasked with evaluating the situation and resolving the issues to improve
both performance and connectivity. Refer to the following exhibits and perform any necessary changes to thewireless and wired infrastructure by adjusting devices. Note: Adjust the LEAST number of devices needed to fix
the issue.
Select and Place:

DRAG DROP
A customer’s email server is not sending emails. Arrange the troubleshooting steps in the order the technician
should perform them:
Select and Place:

DRAG DROP
Drag and drop the fiber cable connection types to the appropriate image.
Select and Place:

DRAG DROP
Build a T-658A Connection
Select and Place:

DRAG DROP
Build a T-658B Connection
Select and Place:

DRAG DROP
What is the result?
Select and Place:

DRAG DROP
What is the result?
Select and Place:

DRAG DROP
You are tasked with creating a network that will accomplish the following requirements
Requirements:
1) The remote sales team must be able to connect to the corporate network
2) Each department must have ONLY two PCs and a server
3) Each department must be segmented from each other
4) The following VLANs have been designated:
a) VLAN 2- Finance
b) VLAN 12- Salesc) VLAN 22- Human Resources (HR)
Complete the network by dragging the required objects into the diagram
INSTRUCTIONS: Objects can be used multiple times and not all placeholders need to be filled
Select and Place:

CORRECT TEXT
SIMULATION
You have been tasked with setting up a wireless network in an office. The network will consist of 3 access
points and a single switch. The network must meet the following parameters.
The SSIDs need to be configured as corpnet with a key of S3cr3t!
The wireless signals should not interfere with each other
The subnet the Access points and Switch are on should only support 30 devices maximum
The access Points should be configured to only support TKIP clients at a maximum speed
Instructions: Click on the devices to review their information and adjust the setting of the APs to meet the given
requirements.

Which of the following PDUs is used by a connectionless protocol?