A Windows server has rebooted by itself several times. There are several functioning non- Windows
servers in the same rack that are connected to the same uninterruptible power supply (UPS). Which
of the following is the MOST likely cause of the reboots?

A server has had a drive fail in its storage RAID set. The administrator swaps the drive with a
replacement and the RAID set does not automatically start to rebuild the replaced drive. Which of
the following utilities would MOST likely be used to initialize the rebuilding of the replacement
drive?

An administrator installs a new network card in a properly functioning DC. During the Windows boot
up process the DC bluescreens. Which of the following is the NEXT step?

The staff is not able to access a database server. The server has an ‘Operating System not found’
error and is set to boot from a fiber channel SAN. All other database servers are set to boot from the
SAN and access the same switch and data as this database server. Which of the following is the
MOST likely cause of the problem?

After a critical service failure occurs the server keeps rebooting every fifteen minutes not giving an
administrator enough time to troubleshoot the failure. Which of the following does the
administrator need to do to allow enough time to work on the system to troubleshoot the problem?

After a server inspection, an administrator notices a single drive failure on a server configured with
RAID 5. Which of the following is the NEXT step to start rebuilding the array?

A high availability solution must be designed for a single file server. Data must be replicated between
the disks to ensure a failure of one disk does not bring down the server. Which of the following
meets these requirements?

Which of the following archiving methods only backs up data that has changed since the previous
backup?

A failure of the primary data center has occurred. A warm site is available for use. Which of the
following should be done FIRST to bring the critical applications online?

An SNMP alert has been generated by a server in the main data center. The alert stated that the
internal temperature of the server has exceeded the threshold. No other servers in the rack have
experienced problems, and no other alerts have come from that server about any other events.
Which of the following is the cause of this issue?