Which SCSI ID should the technician configure the card before installation?
A technician needs to install the first SCSI controller in an application server. The SCSI card is
factory-configured with a SCSI ID of 1. Which SCSI ID should the technician configure the card
before installation?
Which of the following is the minimum number of disks that RAID 10 requires?
RAID needs to be configured for a high-performance, highly available database server. RAID 10 is
selected. Which of the following is the minimum number of disks that RAID 10 requires?
Which RAID level stores identical copies of the logical partitions on an even number of DUPLICATE logical disk
Which RAID level stores identical copies of the logical partitions on an even number of
DUPLICATE logical disks?
Which environmental condition discovered in the room is LEAST critical?
The current data center has run out of space. A room that is located next to the existing data
center is then used to house two racks containing six servers. Six months later, physical
housekeeping is performed as part of a mid-year maintenance plan. Which environmental
condition discovered in the room is LEAST critical?
Which SCSI ID should be assigned to the CD-ROM?
A server computer has a SCSI card installed. The SCSI card supports up to seven devices and
has the SCSI ID 7. There are three hard drives connected to the card with IDs 0, 1, and 2.
A CD-ROM and a tape drive need to be added to the SCSI card. The CD-ROM must have a
higher priority than the tape drive, or any other device that might be connected in the future.
Which SCSI ID should be assigned to the CD-ROM?
Which backup schedule takes the LEAST time to perform?
A company server requires a seven-day backup schedule. The server has 34 GB of data to back
up. The backup device is a 35/70 DLT (Digital Linear Tape) drive.
Which backup schedule takes the LEAST time to perform?
what might be the problem?
There are POST errors when a server is powered on. Which action should be taken FIRST to
determine what might be the problem?
which two file systems are NEVER options?
When using the system configuration utility to prepare a drive or drive array for installation of the
operating system, which two file systems are NEVER options? (Select TWO)
Which action should be taken before attempting this upgrade?
A company plans to upgrade all the servers on a site from their current hard drive devices to Serial
ATA drives. This is a major upgrade that will affect all the servers and the clients who depend on
the network services and the critical data they provide. Which action should be taken before
attempting this upgrade?
Which two are key factors that make a SAN (Storage Area Network) different from a NAS (Network Attached Storag
Which two are key factors that make a SAN (Storage Area Network) different from a NAS
(Network Attached Storage)? (Select TWO)