Policies, procedures and end-user training are effective ways to mitigate:

Which of the following is the number of bits there are in 1024 bytes?

A network administrator is troubleshooting an issue with unstable wireless connections in a residence hall.
Students on the first and second floors are reporting the hall’s SSID is not visible in the evenings. The network administrator has verified the wireless system is operating normally.
Which of the following is the MOST likely cause for the problem reported by students?

Which of the following is an example of a signaling protocol used in VoIP telephony?

A network administrator has determined the ingress and egress traffic of a router’s interface are not being correctly reported to the monitoring server.
Which of the following can be used to determine if the router interface uses 64b vs 32b counters?

Ann, a technician, connects a pair of switches using redundant links. When she checks the status of the links, one of them is not active, even when she changes ports.
Which of the following MOST likely disabled the redundant connection to the other switch?

Several users at an adjacent office building report connectivity issues after a new building was built in between the two offices. The network technician has determined the adjacent office building is connected to the main office building via an 802.11ac bridge. The network technician logs into the AP and confirms the SSID,
encryption and channels are all correct.
Which of the following is MOST likely the cause of this issue?

After upgrading a fiber link from 1Gbps, a network technician ran a speed test of the link. The test shows the link is not operating at full speed and connectivity is intermittent. The two buildings are 1.476ft (450m) apart and are connected using CM4 fiber and 10G SR SFPs. The fiber runs through the electrical and boiler rooms of each building.
Which of the following is the MOST likely reason for the connectivity issue?

A network administrator wants to implement a centralized monitoring solution that utilizes push alerts sent from the client to a server.
Which of the following types of monitoring should be put in place?

Which of the following ports does SIP use?