drag and drop the associated broadcast and/or collison description.
DRAG DROP
Under each network device, drag and drop the associated broadcast and/or collison description.
Objects may be used multiple times, as needed.
Drag and drop the following maximum speeds to their corresponding wireless standards.
DRAG DROP
Drag and drop the following maximum speeds to their corresponding wireless standards. Tokens can
be used more than once.
Drag and drop the fiber cable connection types to the appropriate image.
DRAG DROP
Drag and drop the fiber cable connection types to the appropriate image.
Drag and drop the appropriate configurations to their corresponding requirements.
DRAG DROP
GigSwitch1 is currently configured with a speed of 100 and Duplex is set to Auto on all interfaces.
Interface 2 will be connected to GigSwitch2 which is used for all departments. Interface 1 will be
used for HR traffic only.
GigSwitch1 needs to be configured with the following parameters:
Configure the necessary protocol to prevent switching loops
Configure GigSwitch1 with a /24 IP address for management
Traffic across Interface 1 needs to be forced to accept and receive up to 100Mbps data at
the same time
Traffic across Interface 2 needs to be forced to use Gigabit speeds and maximum
performance
Drag and drop the appropriate configurations to their corresponding requirements. All placeholders
must be filled. Not all configurations will be used.
Arrange the troubleshooting steps in the order the technician should perform them:
DRAG DROP
A customer’s email server is not sending emails. Arrange the troubleshooting steps in the order the
technician should perform them:
You have been tasked with testing a CAT5 cable.
SIMULATION
You have been tasked with testing a CAT5 cable. A summary of the test results can be found on the
screen.
Step 1: Select the tool that was used to create the cable test results.
Step 2: Interpret the best results and select the options that explains the results.
You have been tasked with evaluating the situation and resolving the issues to improve…
SIMULATION
Wireless network users recently began experiencing speed and performance issues after access
point 2 (AP2) was replaced due to faulty hardware. The original network was installed according to a
consultant’s specifications and has always worked without a problem.
You a network technician, have been tasked with evaluating the situation and resolving the issues to
improve both performance and connectivity. Refer to the following diagram and perform any
Necessary changes to the wireless and wired infrastructure by adjusting devices.
Note. Adjust the LEAST number of devices needed to fix the issue all blue icons in the image are
clickable.
Configure the appropriate devices to ensure All workstations have internet connectivity.
SIMULATION
Workstations are unable to access the internet after a recent power outage. Configure the
appropriate devices to ensure All workstations have internet connectivity.
Which of the following should Sara configure?
Sara, the security administrator, must configure the corporate firewall to allow all public IP
addresses on the internal interface of the firewall to be translated to one public IP address on the
external interface of the same firewall. Which of the following should Sara configure?
Which of the following devices is MOST likely being used when processing the following?
Which of the following devices is MOST likely being used when processing the following?
1 PERMIT IP ANY ANY EQ 80
2 DENY IP ANY ANY