PrepAway - Latest Free Exam Questions & Answers

Author: seenagape

Which three are likely causes of this problem?

After adding three additional IDE hard disks and a SCSI DVD-RW drive to an existing server, the
server no longer boots. The original IDE drive is still configured as a master on the primary IDE
channel. After multiple attempts at resetting the server, only two devices attached to the
secondary IDE channel appear during POST.
Which three are likely causes of this problem? (Select THREE)

What could be a possible cause for the lower than expected performance?

You are diagnosing a performance problem with a Fibre Channel attached server that is
configured to run multipathing with dynamic I/O load balancing. You are not seeing the expected
performance. You have determined that the server configuration is correct and that the fabric
paths are not congested. What could be a possible cause for the lower than expected
performance?

What must be configured on the storage subsystem to meet their storage allocation needs?

A customer with sixteen non-clustered SAN attached hosts has a storage subsystem with thirtytwo disk drives. The customer wishes to protect their data using RAID 1. Each server has a need
to see three separate volumes for their final configuration. What must be configured on the storage
subsystem to meet their storage allocation needs?

Which of the following is the NEXT step the project manager should take to keep the project on schedule?

A key team member is performing poorly on a project. The project manager has verified that the
team member knows the project expectations. The project manager has met repeatedly with this
team member to outline expectations. Which of the following is the NEXT step the project
manager should take to keep the project on schedule?