An end user is receiving authentication errors when accessing a load-balancing virtual server that
uses Authentication, Authorization and Access (AAA)-TM. Which shell command should a
NetScaler Engineer execute to show AAA events in real time to help diagnose this issue?
A.
tail /tmp/aaad.debug
B.
cat /tmp/aaad.debug
C.
grep aaa /tmp/nskrb.debug
D.
egrep aaa /tmp/pitboss.debug
Hello guys, 1Y0-240 Exam Questions Free Updated Today!
QUESTION 1
Scenario: A Citrix Administrator has configured the following Access Control List (ACL) to block traffic from the IP address 10.102.29.5.
add simpleacl rule1 DENY -srclP 10.102.29.5
A week later, the administrator found that the ACL is no longer present on the NetScaler.
What could be the reason for this?
A. The administrator did NOT run the apply ACL command.
B. The NetScaler has been restarted without saving the configurations.
C. The Simple ACLs remain active for only 600 seconds.
D. The Simple ACLs remain active for only 60 seconds.
Answer: A
QUESTION 2
Which scenario will cause automatic high availability (HA) synchronization to fail?
A. Different build versions
B. Manually forced synchronization
C. A force failover
D. A configuration change to the primary NetScaler
Answer: B
QUESTION 3
Scenario: A Citrix Administrator is concerned about the amount of health checks the NetScaler is sending to the backend resources. The administrator would like to find a way to remove health checks from specific bound services.
How can the administrator accomplish this?
A. Use the No-Monitor option.
B. Use Service Groups to minimize health checks.
C. Unbind the current monitor.
D. Use reverse condition monitoring.
Answer: A
QUESTION 4
Scenario: A Citrix Administrator needs to add 10 new web servers to an existing server farm. The new servers are configured to serve the same applications and connections and are twice the capacity of the existing servers. The administrator wants to ensure that they are being fully utilized. Currently in the environment, the default load-balancing method is being used.
To ensure that only the 10 new servers are receiving twice the connections of the old servers without changing the load balancing to the rest of the environment, the administrator needs to add a weight of __________to the services attached to the__________servers. (Choose the correct option to complete the sentence.)
A. 50; new
B. 50; old
C. 2; new
D. 2; old
Answer: CD
QUESTION 5
A Citrix Administrator has executed the commands in the screenshot on the NetScaler using the command-line interface.
View the screenshot (Exhibit).
Which two replacements will be the outcome of executing these commands? (Choose two.)
A. http:// will be replaced by https:// in the HTTP RESPONSE
B. https:// will be replaced by http:// in the HTTP RESPONSE
C. http:// will be replaced by https:// in the HTTP REQUEST
D. https:// will be replaced by http:// in the HTTP REQUEST
Answer: B
QUESTION 6
What is the effect of the set cmp parameter -cmpBypassPct 70 command if compression is enabled on the NetScafer?
A. Compression will be bypassed if the NetScaler bandwidth consumption is more than 70%.
B. Compression will be bypassed if the NetScaler CPU load is 70%.
C. Compression will be bypassed if the NetScaler bandwidth consumption is less than 70%.
D. Compression will be bypassed if the NetScaler Memory utilization is 70%.
Answer: B
QUESTION 7
A Citrix Administrator needs to configure the Lights Out Management (LOM) port.
Which statement is applicable to LOM?
A. LOM is accessed using Command-Line Interface (CLI).
B. LOM IP address should be in the same subnet as NSIP.
C. LOM firmware is included in the NetScaler upgrade package.
D. LOM port can be used to remotely monitor and manage the appliance.
Answer: A
QUESTION 8
Scenario; A Citrix Administrator would like to grant access to a Junior Administrator on the NetScaler. The administrator would like to grant full access to everything except the following:
* Shell Access
* User Configuration access
* Partition Configuration access
Which pre-existing command policy would meet the needs of the scenario?
A. Superuser
B. Network
C. Operator
D. Sysadmin
Answer: A
QUESTION 9
A Citrix Administrator notices that the NetScaler is sending the IP addresses of all the active services in the DNS response.
The administrator can use the set gslb vserver__________parameter to avoid this behavior. (Choose the correct option to complete the sentence.)
A. EDR DISABLED
B. EDR ENABLED
C. MIR ENABLED
D. MIR DISABLED
Answer: CD
QUESTION 10
What is the effect of the set gslb parameter – GSLBSvcStateDelayTime 10 command on the Global Server Load Balancing (GSLB) environment, when Metric Excnange Protocol (MEP) is enabled?
A. The Metric Exchange Protocol (MEP) will be marked as DOWN if the GSLB service has been DOWN for 10 seconds.
B. The Metric Exchange Protocol (MEP) will be marked as DOWN if the GSLB vServer has been DOWN for 10 seconds.
C. The GSLB services will be marked as DOWN, if the Metric Exchange Protocol (MEP) connection has been DOWN for 10 seconds.
D. The GSLB services will be marked as DOWN if the service has been DOWN for 10 seconds.
Answer: C
1
0
Passed 1y0-230 Exam Today, come to share some questions in my test:
QUESTION
Which type of entity can a Citrix Administrator configure lo support the use of an SSL rewrite policy?
A. Global server load balancing virtual server
B. Content Switching virtual server
C. SSL load balancing virtual server
D. SSL_Bridge load balancing virtual server
Answer: C
QUESTION
A Citrix Administrator receives user complaints about latency while accessing an application that is being load-balanced on the NetScaler.
Which tool can the administrator use to gather information regarding Response time, Client network latency and Server-side processing time?
A. aaad debug
B. WAN Insight
C. NetScaler Management and Analytics System (MAS)
D. HDX Insight
Answer: C
QUESTION
A Citrix Administrator needs to utilize the client IP address as the source IP address for the NetScaler to server connections.
Which mode on the NetScaler will the administrator utilize to meet this requirement?
A. Layer 2
B. USIP
C. Layer 3
D. USNIP
Answer: B
QUESTION
Scenario: A NetScaler Gateway provides ICA Proxy to an internal XenDesktop site in an environment. The security team wants the Citrix Administrator to configure the NetScaler to block client drives if the client device fails a security scan. Which NetScaler feature allows the administrator to satisfy the security team’s requirements without making any changes to the XenDesktop configuration?
A. Traffic Policy
B. SmartAccess
C. SmartControl
D. Authorization Policy
Answer: D
QUESTION
Scenario: A Citrix Administrator needs to configure a NetScaler Gateway virtual server in order to meet the security requirements of the organization. The administrator needs to configure timeouts for end-user sessions, to be triggered by the following behaviors:
* Inactivity for at least 15 minutes
* No keyboard or mouse activity for at least 15 minutes
Which two timeout settings can the administrator configure to meet the requirements? (Choose two.)
A. Client Idle Time-out set to 15
B. Forced Time-out set to 15
C. Client Idle Time-out set to 900
D. Session Time-out set to 15
E. Session Time-out set to 900
F. Forced Time-out set to 900
Answer: BD
QUESTION
Which NetScaler feature can a Citrix Administrator use to create a custom footer for a NetScaler Gateway login page?
A. Rewrite
B. SmartAccess
C. HTTP Callout
D. Responder
Answer: A
QUESTION
Which two components need to be configured for SmartAccess? (Choose two.)
A. Configuration logging
B. XenDesktop policies
C. XML Trust
D. StoreFront server groups
Answer: CD
QUESTION
Scenario: A user is attempting to access a web server, which is load-balanced by the NetScaler using HTTPS. The user received the following message:
SSL/TLS error: You have not chosen to trust “Certificate Authority” the issuer of the server’s security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?
A. Ensure that the intermediate Certificate is linked to the Server Certificate.
B. Ensure that the user has the Server Certificate installed.
C. Ensure that the intermediate Certificate is linked to the Root Certificate.
D. Ensure that the user has the Certificate’s Public key.
Answer: C
QUESTION
What does a Citrix Administrator need to do on NetScaler Gateway to ensure that users accept the terms and conditions before they can log on using NetScaler Gateway?
A. Configure a Responder policy.
B. Upload an HTML file to the NetScaler appliance.
C. Create an end user license agreement (EULA).
D. Configure a Rewrite policy.
Answer: A
QUESTION
Which type of policy can be applied to a NetScaler Gateway virtual server to limit access to XenDesktop resources, if the user device does NOT comply with the company’s security requirements?
A. Responder
B. Authorization
C. Session
D. Traffic
Answer: D
QUESTION
Which mode does a Citrix Administrator need to configure in order to allow the NetScaler to forward any packets that are NOT destined for an IP address which is NOT configured on NetScaler?
A. Layer 3
B. USIP
C. Layer 2
D. MAC-based Forwarding
Answer: C
0
0