Scenario: For security reasons, the NSIP needs to be configured to only be accessible on interface 0/1, which is
VLAN 300.
The NSIP address is 10.110.4.254 and the subnet mask is 255.255.255.0.
How would the network engineer achieve this configuration?
A.
set ns config -nsvlan 300 -ifnum 0/1
B.
set ns ip 10.110.4.254 -gui ENABLED -vrID 300
C.
add vlan 300
set ns ip 10.110.4.254 -mgmtAccess ENABLED
D.
set ns config -IPAddress 10.110.4.254 -netmask 255.255.255.0
Citrix NetScaler Command Reference Guide:
>>>> set ns config>>>
Synopsis
set ns config [-IPAddress -netmask
] [-nsvlan -ifnum
…] [-httpPort …] [-maxConn
] [-maxReq ] [-cip
( ENABLED | DISABLED ) ] [-cookieversion (
0 | 1 )] [-pmtuMin ] [-pmtuTimeout
] [-ftpPortRange ] [-timezone
]
0
0