An engineer has two NetScaler devices in two different datacenters and wants to create a high availability (HA)
pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A.
Configure StaySecondary on the second datacenter appliance.
B.
Ensure that INC mode is enabled during the creation of the HA Pair.
C.
Enable the HAMonitors on all interfaces after the HA Pair has been created.
D.
Change the NSIP of the second appliance to be on the same subnet as the first appliance.
B – Ensure that INC mode is enabled during the creation of the HA Pair.
If the nodes in an HA pair reside on two separate networks, the primary and secondary node must have independent network configurations. This means that nodes on different networks cannot share entities such as MIPs, SNIPs, VLANs, and routes. This type of configuration, where the nodes in an HA pair have different configurable parameters, is known as Independent Network Configuration (INC) or Symmetric Network Configuration (SNC).
0
0