You need to delete an auto-registration Cisco Unified Communications Manager group for a
cluster. What should you do?
A.
Remove the Cisco Unified CallManager group devices.
B.
Disable auto-registration settings in the Cisco Unified CallManager group.
C.
Assign a different call group as the auto-registration Cisco Unified CallManager group.
D.
Delete the auto-registration Cisco Unified CallManager group without performing any
action.
Explanation:
Disable Autoregistration
This section describes how to disable autoregistration.
Procedure
Step 1 Choose System > Cisco Unified CM.
Step 2 From the Cisco Unified Communications Manager list, choose the Cisco Unified Communications Manager where you want to disable autoregistration.
Step 3 To disable autoregistration for this Cisco Unified Communications Manager, click the Auto-registration Disabled on this Cisco Unified Communications Manager check box. (When this box is checked, autoregistration specifies disabled.)
Note
You can also disable autoregistration by setting the Starting Directory Number and Ending Directory Number to the same value.
Step 4 To save the changes in the database, click Save.
Step 5 Repeat Step 2 through Step 4 for each Cisco Unified Communications Manager where you want to disable autoregistration.
1
0