Prior to enabling PPPoE in a virtual private dialup network group, which task must be completed?
A.
Disable CDP on the interface.
B.
Execute the vpdn enable command.
C.
Execute the no switchport command.
D.
Enable QoS FIFO for PPPoE support.
Get 50% Discount on All Your Purchases
at PrepAway.com - Latest Exam Questions
This is ONE TIME OFFER
50%
To configure the physical interface that will carry the PPPoE session and link it to the appropriate virtual template interface, you need to complete the following steps.
SUMMARY STEPS
1. Router(config)# vpdn enable
2. Router(config-if)# vpdn group name
3. Router(config-if)# accept dialin
4. Router(config-if)# protocol pppoe
PPPoE combines two widely accepted standards, Ethernet and PPP, to provide an authenticated method of assigning IP addresses to client systems. PPPoE clients are typically personal computers connected to an ISP over a remote broadband connection, such as DSL or cable service.
The “vpdn enable” command is used to enable virtual private dialup networking (VPDN) on the router and inform the router to look for tunnel definitions in a local database and on a remote authorization server (home gateway). The following steps include: configure the VPDN group; configure the virtual-template; create the IP pools.
0
0