2 Comments on “Which NetFlow component is applied to an interface and collects information about flows?”

1. sky says:

   August 11, 2016 at 12:44 am

   Flow monitors are the Flexible NetFlow component that is applied to interfaces to perform network traffic monitoring. Flow monitors consist of a record and a cache. You add the record to the flow monitor after you create the flow monitor. The flow monitor cache is automatically created at the time the flow monitor is applied to the first interface. Flow data is collected from the network traffic during the monitoring process based on the key and nonkey fields in the record, which is configured for the flow monitor and stored in the flow monitor cache.
   For example, the following example creates a flow monitor named FLOW-MONITOR-1 and enters Flexible NetFlow flow monitor configuration mode:
   Router(config)# flow monitor FLOW-MONITOR-1
   Router(config-flow-monitor)#

   (Reference: http://www.cisco.com/c/en/us/td/docs/ios/fnetflow/command/reference/fnf_book/fnf_01.html#wp1314030)

   
   
   
   0

   
   
   
   0
2. Julius Simpson says:

   November 6, 2017 at 3:05 am

   What’s more, free of the new 489Q 300-101 dumps are available here FYI:

   https://drive.google.com/open?id=0B-ob6L_QjGLpZEE0S2YxR3ZMUWs

   Best Regards!

   
   
   
   0

   
   
   
   0