Which four of the following are required to be defined when configuring a SIP trunk to Cisco Unified

Which four of the following are required to be defined when configuring a SIP trunk to Cisco Unified Presence? (Choose four.)

A.
Presence Group

B.
Device Name

C.
Location

D.
SIP Trunk Security Profile

E.
Device Pool

F.
Packet Capture Mode

G.
SIP Profile

H.
DTMF Signal Method

Explanation:
OK .
Deployment Guide for Cisco Unified Presence Release 8.5

Procedure: Configuring the SIP Trunk for Cisco Unified Presence

Step 1 Select Cisco Unified Communications Manager Administration > Device > Trunk.
Step 2 Select Add New.
Step 3 Select SIP Trunk from the Trunk Type menu.
Step 4 Select SIP from the Device Protocol menu.
Step 5 Select None for the Trunk Service Type.
Step 6 Select Next.
Step 7 Enter CUPS-SIP-Trunk for the Device Name.
Step 8 Select a device pool from the Device Pool menu.
Step 9 In the SIP Information section at the bottom of the window, configure the following values:
a. In the Destination Address field, enter the dotted IP address, or the FQDN (Fully Qualified Domain Name), or the DNS SRV record for the Cisco Unified Presence server.
b. Enter 5060 for the Destination Port.
c. Select Non Secure SIP Trunk Profile from the SIP Trunk Security Profile menu.
d. Select Standard SIP Profile from the SIP Profile menu.
Step 10 Select Save.