3 Comments on “Which BGP option is required when load sharing over multiple equal-bandwidth parallel links from a single CE r”

1. Koraa says:

   April 10, 2015 at 6:24 pm

   The preferred answer should be A.

   To enable EBGP multipath load balancing, the ‘maximum-paths’ command is used.

   http://www.cisco.com/c/en/us/td/docs/ios/12_2sx/feature/guide/fsxeibmp.html

   eBGP multihop is used to establish neighborship between nodes not directly connected.

   BGP synchronization: a route should be learned through IGP by all routers in an AS to pass transit traffic.

   
   
   
   0

   
   
   
   0
   1. Marek says:

      July 23, 2015 at 9:58 pm

      Situation described is not MPLS-VPN
      See my link for explanation.

      
      
      
      0

      
      
      
      0
2. Marek says:

   July 23, 2015 at 9:54 pm

   B looks good!

   http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13762-40.html

   
   
   
   0

   
   
   
   0