A network administrator needs to implement a service that enables granular control of IOS
commands that can be executed. Which AAA authentication method should be selected?
A.
TACACS+
B.
RADIUS
C.
Windows Active Directory
D.
Generic LDAP
Get 50% Discount on All Your Purchases
at PrepAway.com - Latest Exam Questions
This is ONE TIME OFFER
50%
this dump is it still valid ?
0
0
As of December 18th 2015 i can confirm this is no longer valid.
There are now ISE1.3 and ISE 2.0 questions present.
0
0
I did this exam today too and can confirm that Terry`s comment is correct. All official training material constantly mentioned that exam is based on version 1.2 but now all the questions are different and based on 1.3 and 2.0. I believe Cisco should have changed the exam number as a result of that otherwise the exam is a farce.
0
0
Failed the exam. I read oficial cert guide twice, cbtnuggets videos and some materials from cisco sites and after this I tried these questions. Some of them were in the exam, but there is a lot of new questions. I have no idea if pass leader dump below is valid, i did not see it
0
0
Also failed the exam with 794 instead of 846 points. I try my best but there were a lot of new questions about ISE 1.3 and 2.0 Questions on this site are out of date. There were questions about TACACS implementation on ISE (on ISE 1.2 and below RADIUS is the only “language of love” between NAD and ISE). Neither Cisco Official Cert guide nor CBT Nuggets talks about TACACS implementation on ISE since they both work with ISE 1.2
You have done a good work, but can you please update soon questions on this website?
0
0
Has someone news about exam? Is it true about totaly renewed exam (questions cover ISE v2.0, implement TACACS on ISE, etc…) ? i study from this site. Is it enought? THNX
0
0
Wrote the exam today. Only 4 questions from here. Also used 4 other well-know (paid-for) sources. No good either.
0
0
Hi, I’ve passed 300-208 SISAS exam. It was my second try. Prepare for this questions which I haven’t seen in any cert dump / VCE file:
==========
QUESTIONS:
==========
1. After how many days will ISE purge expired guest user accounts.
Possible answers: 1 day, 10 days, 15 days, …
2. After what time will ISE purge authentication session without receiving RADIUS Accounting Stop message.
Possible answers: 1 day, x days, y days…
3. ISE 2.0 TACACS – Screenshot with TACACS Shell Profile with configured default privilege level 9 and maximum privilege level 10. Question is what commands is user allowed to execute.
Possible options: Configure t, privilege 10, show run, exit,…
4. ISE 2.0. TACACS – Screenshot with TACACS Command Set with entries with wildcards used:
1. permit ping .*
2. permit conf t
3. permit s*w .*
4. deny xxx
5. deny always yyy
Question is what commands is user allowed to execute.
Possible options: Show ip int brief, show ver, configure term, ping 10.20.0.1, …
5. BYOD – what components are needed in client provisioning.
I don’t remember possible answers, I think there was Wizard, Agent, Supplicant profile, etc…
6. ISE 1.3 Client Certificates: What 2 options are awailable to take with certificate.
Possible options: Export, Delete, Revoke, Unrevoke, …
7. ISE 1.3 Sponsor portal: What actions are available for sponsor to take with user accounts.
I don’t remember possible answers.
8. ISE 2.0 – what URL will ISE use to redirect user to CWA portal.
Possible options (Check all possible portal URLs in ISE Authorization profile. The difference is in “action=” cwa / mdm / cpp / nsp / cwa&type=drw):
For a Hotspot Guest portal:
https://ip:port/guestportal/gateway?sessionID=SessionIdValue&portal=PortalID&action=cwa&type=drw
For a Mobile Device Management (MDM) portal:
https://ip:port/mdmportal/gateway?sessionID=SessionIdValue&portal=PortalID&action=mdm
10. What is the main attribute which is used by ISE to distinguish MAB from Dot1x auth.
Possible options: RADIUS Service-Type 6 (Call-Check), Service-Type 8 (Framed IP), Service-Type 25 (Class), … As I remember, there are only Service Type number codes (6, 8, 25, …) no names – so learn this numbers also.
11. Redirect ACL & Downloadable ACL on Catalyst SW. There were options with different access lists permitting and/or denying access to ISE IP and/or remetiation server IP. Question was what access list combination (redirect ACL + dACL) is correct for redirect to portal & remediation server.
12. How many bits have TrustSec SGT:
Possible options: 16, 32, etc…
13. MacSec 802.1AE – Questions regarding keying – Connectivity Association Key (CAK). What is it used for.
As you can see, several questions was regarding Sponsor portal, guest portal, guest users. Some questions were about MacSec 802.1AE and TrustSec. There was simlet where you should configure MAB and correct authentication methods order (MAB > dot1x) only on Catalyst SW, not ISE. Another simlet was about editing ISE Authentication & Authorization policy and also troubleshooting output from ISE Live Log.
0
0
hi,Niko!
thanks for your sharing , i know these are the questions in 300-208, but i don’t really confirm the answers , Can you list the answers you think under the questions ,
0
0
Can you list the correct answers of these questions,thanks a lot .
0
0
!!!!!!!!!!!!Attention ExamCollection false advertising!!!!!
The dump 300-208 211q is a fake !! on Website there are 211 question but after buy and download there are only 174, it’s a old dump.
0
0
New 300-208 Exam Questions and Answers Updated Recently (11/Mar/2016):
NEW QUESTION 195
Which devices support download of environmental data and IP from Cisco ISE to SGT bindings in their SGFW implementation?
A. Cisco ASA devices
B. Cisco ISR G2 and later devices with ZBFW
C. Cisco ISR G3 devices with ZBFW
D. Cisco ASR devices with ZBFW
Answer: A
NEW QUESTION 196
In Cisco ISE 1.3, where is BYOD enabled with dual-SSID onboarding?
A. client provisioning policy
B. client provisioning resources
C. BYOD portal
D. guest portal
Answer: D
NEW QUESTION 197
Which description of the purpose of the Continue option in an authentication policy rule is true?
A. It allows Cisco ISE to check the list of rules in an authentication policy until there is a match.
B. It sends an authentication to the next subrule within the same authentication rule.
C. It allows Cisco ISE to proceed to the authorization policy regardless of authentication pass/fail.
D. It sends an authentication to the selected identity store.
E. It causes Cisco ISE to ignore the NAD because NAD will treat the Cisco ISE server as dead.
Answer: C
NEW QUESTION 198
How many days does Cisco ISE wait before it purges a session from the active session list if no RADIUS Accounting STOP message is received?
A. 1
B. 5
C. 10
D. 15
Answer: B
NEW QUESTION 199
A user configured a Cisco Identity Service Engine and switch to work with downloadable access list for wired dot1x users, though it is failing to work. Which command must be added to address the issue?
A. ip dhcp snooping
B. ip device tracking
C. dot1x pae authenticator
D. aaa authentication dot1x default group radius
Answer: B
NEW QUESTION 200
Which option is the correct format of username in MAB authentication?
A. host/LSB67.cisco.com
B. {email not allowed}
C. 10:41:7F:46:9F:89
D. CISCO\chris
Answer: C
NEW QUESTION 201
Refer to the exhibit. In a distributed deployment of Cisco ISE, which column in Figure 1 is used to fill in the Host Name field in Figure 2 to collect captures on Cisco ISE while authenticating the specific endpoint?
Image URL: http://www.200-120.info/wp-content/uploads/2016/03/2011.jpg
A. Server
B. Network Device
C. Endpoint ID
D. Identity
Answer: A
NEW QUESTION 202
Which ISE feature is used to facilitate a BYOD deployment?
A. self-service personal device registration and onboarding
B. Guest Service Sponsor Portal
C. Local Web Auth
D. Guest Identity Source Sequence
Answer: A
NEW QUESTION 203
What are two actions that can occur when an 802.1X-enabled port enters violation mode? (Choose two.)
A. The port is error disabled.
B. The port drops packets from any new device that sends traffic to the port.
C. The port generates a port resistance error.
D. The port attempts to repair the violation.
E. The port is placed in quarantine state.
F. The port is prevented from authenticating indefinitely.
Answer: AB
NEW QUESTION 204
Which option describes the purpose of configuring Native Supplicant Profile on the Cisco ISE?
A. It helps employees add and manage new devices by entering the MAC address for the device.
B. It is used to register personal devices on the network.
C. It enforces the use of MSCHAPv2 or EAP-TLS for 802.1X authentication.
D. It provides posture assessments and remediation for devices that are attempting to gain access to the corporate network.
Answer: C
NEW QUESTION 205
Which configuration is required in the Cisco ISE Authentication policy to allow Central Web Authentication?
A. Dot1x and if authentication failed continue
B. MAB and if user not found continue
C. MAB and if authentication failed continue
D. Dot1x and if user not found continue
Answer: B
NEW QUESTION 206
……
P.S. These New 300-208 Exam Questions Were Just Updated From The Real 300-208 Exam, You Can Get The Newest 300-208 Dumps In PDF And VCE From — http://bitly.com/300-208-exam (232q)
Good Luck !!!
0
0
New 300-208 Exam Questions and Answers Updated Recently (11/Mar/2016):
NEW QUESTION 195
Which devices support download of environmental data and IP from Cisco ISE to SGT bindings in their SGFW implementation?
A. Cisco ASA devices
B. Cisco ISR G2 and later devices with ZBFW
C. Cisco ISR G3 devices with ZBFW
D. Cisco ASR devices with ZBFW
Answer: A
NEW QUESTION 196
In Cisco ISE 1.3, where is BYOD enabled with dual-SSID onboarding?
A. client provisioning policy
B. client provisioning resources
C. BYOD portal
D. guest portal
Answer: D
NEW QUESTION 197
Which description of the purpose of the Continue option in an authentication policy rule is true?
A. It allows Cisco ISE to check the list of rules in an authentication policy until there is a match.
B. It sends an authentication to the next subrule within the same authentication rule.
C. It allows Cisco ISE to proceed to the authorization policy regardless of authentication pass/fail.
D. It sends an authentication to the selected identity store.
E. It causes Cisco ISE to ignore the NAD because NAD will treat the Cisco ISE server as dead.
Answer: C
NEW QUESTION 198
How many days does Cisco ISE wait before it purges a session from the active session list if no RADIUS Accounting STOP message is received?
A. 1
B. 5
C. 10
D. 15
Answer: B
NEW QUESTION 199
A user configured a Cisco Identity Service Engine and switch to work with downloadable access list for wired dot1x users, though it is failing to work. Which command must be added to address the issue?
A. ip dhcp snooping
B. ip device tracking
C. dot1x pae authenticator
D. aaa authentication dot1x default group radius
Answer: B
NEW QUESTION 200
Which option is the correct format of username in MAB authentication?
A. host/LSB67.cisco.com
B. {email not allowed}
C. 10:41:7F:46:9F:89
D. CISCO\chris
Answer: C
NEW QUESTION 201
Refer to the exhibit. In a distributed deployment of Cisco ISE, which column in Figure 1 is used to fill in the Host Name field in Figure 2 to collect captures on Cisco ISE while authenticating the specific endpoint?
Image URL: w w w.200-120.info/wp-content/uploads/2016/03/2011.jpg (delete space)
A. Server
B. Network Device
C. Endpoint ID
D. Identity
Answer: A
NEW QUESTION 202
Which ISE feature is used to facilitate a BYOD deployment?
A. self-service personal device registration and onboarding
B. Guest Service Sponsor Portal
C. Local Web Auth
D. Guest Identity Source Sequence
Answer: A
NEW QUESTION 203
What are two actions that can occur when an 802.1X-enabled port enters violation mode? (Choose two.)
A. The port is error disabled.
B. The port drops packets from any new device that sends traffic to the port.
C. The port generates a port resistance error.
D. The port attempts to repair the violation.
E. The port is placed in quarantine state.
F. The port is prevented from authenticating indefinitely.
Answer: AB
NEW QUESTION 204
Which option describes the purpose of configuring Native Supplicant Profile on the Cisco ISE?
A. It helps employees add and manage new devices by entering the MAC address for the device.
B. It is used to register personal devices on the network.
C. It enforces the use of MSCHAPv2 or EAP-TLS for 802.1X authentication.
D. It provides posture assessments and remediation for devices that are attempting to gain access to the corporate network.
Answer: C
NEW QUESTION 205
Which configuration is required in the Cisco ISE Authentication policy to allow Central Web Authentication?
A. Dot1x and if authentication failed continue
B. MAB and if user not found continue
C. MAB and if authentication failed continue
D. Dot1x and if user not found continue
Answer: B
NEW QUESTION 206
……
P.S. These New 300-208 Exam Questions Were Just Updated From The Real 300-208 Exam, You Can Get The Newest 300-208 Dumps In PDF And VCE From — http://bitly.com/300-208-exam (232q)
Good Luck !!!
0
0
David, Do you have the all questions?
thanks for sharing!!!
0
0
please send new question for 300-208.
my email is almafx1@gmail.com
0
0
Beware of 244Q from any Source! They just took 120 questions for the old 174Q and REPEATED it multiple times. They also took some 30+ VPN questions from old 300-209 questions.
0
0
Hi all,
for the NEW QUESTION 204:
i think that the naswer is B .
cisco CONF GUIDE ISE 2.0 : definition of Native suplicant profile ” You can create native supplicant profiles to enable users to bring their own devices into the Cisco ISE network “
0
0
this dump is it still valid ?
0
0
Besides, part of that new 300Q 300-208 Dumps are available here:
https://1drv.ms/f/s!Aq3EkOX-B1yegR-ZeeCwg90H7vjB
Best Regards!
0
0