In a Cisco CatOS switch, what is the recommended practice when configuring switch-to-switch intercommunications to carry multiple VLANs for Dynamic Trunk Protocol?
A.
auto to auto_negotiate
B.
disable Dynamic Trunk Protocol when operating in the distribution layer
C.
auto to auto_no_negotiate
D.
desirable to desirable_no_negotiate
E.
on to on_negotiate
F.
desirable to desirable_negotiate
Explanation:
Access Layer Best Practices
When designing the building access layer, you must consider the number of users or ports required to size up the LAN switch. Connectivity speed for each host should also be considered. Hosts might be connected using various technologies such as Fast Ethernet, Gigabit Ethernet, or port channels. The planned VLANs enter into the design.Performance in the access layer is also important. Redundancy and QoS features should be considered. The following are recommended best practices for the building access layer:
Cisco Press CCDA 640-864 Official Certification Guide Fourth Edition, Chapter 3