What is the default option for framing when you configure T1 controller?
A.
Super Frame
B.
alternate mark inversion
C.
C.Extended Super Frame
D.
D.cyclic redundancy check 4
E.
E.high-density bipolar 3
F.
F.No-CRC4
G.
G.binary 8-zero substitution
H.
Australia
Explanation:
http://www.cisco.com/c/en/us/td/docs/wireless/asr_900/software/guide/chassis/ASR903-ChassisSW/T1-E1_Ifc_Module.pdf
RCR4 is for E1 not T1
0
0
only C (ESF) — http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/release/15-3_1_S/chassis/configuration/guide/3600x_24cxscg/sw_T1-E1.html#wp1094919
0
0
Digital T1 lines use SF or ESF framing formats.
CRC or noCRC for E1
0
0
For T1 Controllers:
Router(config-controller)# framing {sf |
esf}
For E1 Controllers:
Router(config-controller)# framing {crc4 |
no-crc4}
Selects the framing type.
• sf—Specifies Super Frame as the T1 frame type. (sf
is not supported.)
• esf—Specifies Extended Super Frame as the T1
frame type. This is the default for E1.
• crc4—Specifies CRC4 as the E1 frame type. This is
the default for E1.
• no-crc4—Specifies no CRC4 as the E1 frame type.
0
0
QUESTION
The Cisco Unified Communications architecture supports which three technologies? (Choose three.)
A. Physical Security
B. Cisco Unified Video Advantage
C. Intelligent Building Management
D. Contact Center
E. Workforce Optimization
F. Smart Grid Management
Answer: BDE
QUESTION
What are the three characteristics that govern the type of Cisco Unified Communications Manager deployment model? (Choose three.)
A. number of applications
B. size
C. type of applications
D. network characteristics
E. services provided by the PSTN carrier
F. geographical distribution
Answer: BDF
QUESTION
Which codec provides native WebRTC-based video chat support in browsers such as Mozilla Firefox?
A. H.265
B. WMV
C. H.264
D. G.711
E. H.323
Answer: C
QUESTION
An engineer is setting up a system with voice and video endpoints using auto-QoS policy on the switches. Which DSCP values are expected for interactive voice and video?
A. F and AF-41
B. EF and CS6
C. EF and CS3
D. EF and AF21
Answer: A
Explanation:
QUESTION
Which statement about translation patterns and transformation patterns is true?
A. Both transformation patterns and translation patterns support only numeric values.
B. Translation patterns support numeric and alphanumeric values, whereas transformation patterns support only numeric values.
C. Transformation patterns support numeric and alphanumeric values, whereas translation patterns support only numeric values.
D. Both transformation patterns and translation patterns support numeric and alphanumeric values.
Answer: D
QUESTION
Which two are enterprise parameters? (Choose two.)
A. User search limit
B. T302 parameter
C. Enable Call Detail Records
D. Enable Dependency Records
E. codecs parameters for voice media-streaming applications
Answer: AD
QUESTION
An organization has built their video infrastructure to perform ad hoc video calls, but they also need to conduct managed video conference calls.
Which hardware component is needed to conduct these calls?
A. VCS-E
B. IOS gateway
C. MCU
D. TelePresence server
Answer: A
QUESTION
Refer to the exhibit. A Network Administrator needs to create a SIP route pattern to communicate with Monterrey’s Gateway. The Administrator does not understand why this is not working properly. Which two statements explain the issue and resolve the problem? (Choose two.)
A. The Administrator needs to set up a SIP trunk between Monterrey’s Gateway and Cisco Unified Communications Manager.
B. The Administrator should type the reload command into Monterrey’s Gateway
C. The issue is caused by a failure of communication between the Monterrey’s Gateway and Cisco Unified Communications Manager
D. The issue is caused by incorrect protocol integration between Monterrey’s Gateway and Cisco Unified Communications Manager.
Answer: AD
QUESTION
To verify that proper digit manipulation is being applied when using called party transformation patterns, which Cisco IOS command do you use from the router or voice gateway?
A. show voice ccapi inout
B. debug voice ccapi in
C. show voice ccapi
D. show voice ccapi in
E. debug voice ccapi inout
F. debug voice ccapi out
G. show voice ccapi out
Answer: E
Explanation:
QUESTION
Which two components must an engineer configure before configuring SIP route pattern? (Choose two.)
A. route filter
B. SIP trunk
C. route partition
D. calling search space
E. SIP profile
Answer: BE
0
0
And More new 300-070 Practice Questions can be viewed here: https://drive.google.com/drive/folders/0B75b5xYLjSSNMzVucWVTMlQwMWc?usp=sharing
0
0