What additional fields must be configured in the configuration wizard if the controller role is
selected as a local instead of a standalone controller?

The reusable wizards are accessible in which one of the following ways?

When you create a WLAN SSID in the WLAN/LAN wizard what AP group is it automatically added
to?

What cannot be configured from the Initial Configuration wizards?

The screen captures above show the 802.1X authentication profile and AAA profile settings for a
VAP.

If machine authentication fails and user authentication fails, which role will be assigned?

The screen captures above show the 802.1X authentication profile and AAA profile settings for a
VAP.

If machine authentication passes and user authentication passes, which role will be assigned?

A customer has a remote AP deployment, where each remote AP has an IPSEC VPN tunnel with
L2TP to the controller. 1 of the remote APs is stuck in the user table and hasn’t yet transitioned to
the AP active table in the controller. The customer suspects that the AP is not setting up its VPN
connection successfully. Which of the following commands might be useful in troubleshooting this?
Select all that apply.

A customer has configured a 3000 controller with the following commands:
Vlan 55
Vlan 56
Vlan 57
Interface gigabitethernet 1/0
switchport mode trunk
switchport trunk native vlan 55
switchport trunk allowed vlan 55-57
Which of the following sentences best describes this port?

A user connected to a Captive Portal VAP successfully. When the user opens their browser and
tries to access their homepage, they get redirected as expected to another URL on the Aruba
Controller. However, they see an error message that web authentication has been disabled. What
might be a cause of this?

Which profiles are required in an AP Group to enable an SSID with VLAN 1, WPA2 and LMSIP?