Where are Aruba Vendor Specific Attributes (VSA) programmed?

Which match condition can be used by a server derivation rule?

Which is an Aruba specific DSA that can be used in a user derivation rule?

Other than a user role, what attribute can be applied to a user with a derivation rule?

As a user moves through the authentication process, which of the following is not used in a derivation rule?

ip access-list session anewone
user network 10.1.1.0 255.255.255.0 any permit
user host 10.1.1.1 any deny
user any any permit
Referring to the above portion of a Mobility Controller configuration file, what can you conclude?

(Choose all of the correct answers.)

ip access-list session anewone
user network 10.1.1.0 255.255.255.0 any permit
user any any permit
host 10.1.1.1 host 10.2.2.2 any deny
A user sends a frame with the following attributes:
Source IP: 10.1.1.1 Destination IP: 10.2.2.2 Destination Port: 25
Based on the above Mobility Controller configuration file segment, what will this policy do with the user frame?

Refer to the following configuration segment for this item.
netdestination “internal”
no invert network 172.16.43.0 255.255.255.0 position 1
range 172.16.11.0 172.16.11.16 position 2
!
ip access-list session “My-Policy”
alias “user” alias “internal” service_any permit queue low
!
A user frame is evaluated against this access-list with the following attributes:
Source IP: 172.17.49.3 Destination IP: 10.100.86.37 Destination Port: 80
Referring to the above file segment, how will the frame be handled by this access-list?

Refer to the following configuration segment for this item.
ip access-list session anewone
user network 10.1.1.0 255.255.255.0 any permit
user host 10.1.1.1 any deny
user any any permit
Based on the above Aruba Mobility Controller configuration segment, which statements best describe this policy? (Choose all the correct answers.)

Review the following truncated output from an Aruba controller for this item.

(Example) #show rights logon
Derived Role = ‘logon’
Up BW:No Limit Down BW:No Limit
L2TP Pool = default-l2tp-pool
PPTP Pool = default-pptp-pool
Periodic reauthentication: Disabled
ACL Number = 1/0
Max Sessions = 65535

Based on the above output from an Aruba controller, an unauthenticated user assigned to the logon role attempts to start an http session to IP address
172.16.43.170.
What will happen?