What cannot be configured from the Initial Configuration wizards?

The screen captures above show the 802.1X authentication profile and AAA profile settings for a VAP.

If machine authentication fails and user authentication fails, which role will be assigned?

The screen captures above show the 802.1X authentication profile and AAA profile settings for a VAP.

If machine authentication passes and user authentication passes, which role will be assigned?

A customer has a remote AP deployment, where each remote AP has an IPSEC VPN tunnel with L2TP to the controller. 1 of the remote APs is stuck in the user
table and hasn’t yet transitioned to the AP active table in the controller. The customer suspects that the AP is not setting up its VPN connection successfully. Which
of the following commands might be useful in troubleshooting this?
Select all that apply.

A customer has configured a 3000 controller with the following commands:
Vlan 55
Vlan 56
Vlan 57
Interface gigabitethernet 1/0
switchport mode trunk
switchport trunk native vlan 55
switchport trunk allowed vlan 55-57
Which of the following sentences best describes this port?

A user connected to a Captive Portal VAP successfully. When the user opens their browser and tries to access their homepage, they get redirected as expected to
another URL on the Aruba Controller. However, they see an error message that web authentication has been disabled. What might be a cause of this?

Which profiles are required in an AP Group to enable an SSID with VLAN 1, WPA2 and
LMSIP?

View the Server group and User Roles screen shots above

A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-Id with a value of ?employee?. What Role
will the user get?

View the Server group and User Roles screen shots above.

A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-Id with a value of ?employee?. The user
was placed in the guest Role.
What statements below are correct?

View the Server group screen shot above.

A company has provisioned the same VAP, AAA and SSID profiles at both its Miami and NY offices. This Server Group is applied for 802.1x authentication at both
locations. The user’s credentials are only found in the Miami Radius server ?RadiusMiami?. There is no Radius synchronization. What happens when the user
attempts to authenticate?