Represent the following address in Classless Interdomain Routing (CIDR) notation: Network
address: 150.220.64.0 Network mask: 255.255.192.0

You have been assigned the CIDR block of 116.65.4.0/22. Which of the following IP
addresses could you use as a host? Choose all that apply

Your network administrator has subnetted your Class C address 198.17.54.0 into 14
useable subnetworks. One network segment requires support for 30 hosts. Using

supernetting techniques, which subnetwork could you assign to the 30-host segment?

Represent the following list of addresses as the most accurate aggregate route:
60.48.0.0/24 60.48.1.0/24 60.48.2.0/24 60.48.3.0/24 60.48.4.0/24 60.48.5.0/24 60.48.6.0/24
60.48.7.0/24

Two networks, Network A and Network B, are connected through four routed paths. The
paths are configured as follows: Path 1: Network A connects to Network B through three
routers over a series of T1 (1.544Mbps) point-topoint links Path 2: Network A connects to
Network B through four routers over a series of 10Mbps Ethernet links Path 3: Network A
connects to Network B through three routers over a series of ISDN-BRI (128Kbps) links
Path 4: Network A connects to Network B through two routers over a series dial-up
(56Kbps) links If the routers run Routing Information Protocol (RIP) version 1, have no static
routes configured, and all the paths described above are available, which path will the
Network A and B routers choose first?

A link state protocol uses what metric type to choose the best path to a destination network?

How would you best describe route poisoning in a Distance Vector routing protocol?

What are the maximum number of networks advertised in a RIPv1 Update?

List the correct sequence of operations when a router receives a Ethernet Frame from a
LAN.

Which two characteristics make RIPv2 preferable for use over RIPv1? (Choose two.)