2 Comments on “Which feature of HP ProLiant Gen9 servers enables IPv6 PXEboot?”

1. Pedro says:

   February 1, 2016 at 11:10 am

   UEFI Mode is enabled by default and is required for certain options, including:

   •Secure Boot, UEFI Optimized Boot, Generic USB Boot, IPv6 PXE Boot, iSCSI Boot, and Boot from URL

   •Fibre Channel/FCoE Scan Policy

   •Booting to a hard disk drive larger than 2.2 TB

   •Booting the Embedded User Partition.

   CORRECT: B

   
   
   
   0

   
   
   
   0
2. sithi says:

   August 17, 2016 at 6:47 am

   yh B is the answer

   : Firmware that meets the UEFI 2.3.1 specifications provides the following benefits:
   * Ability to more easily support large hard drives (more than 2 terabytes) and drives with more than
   four partitions.
   * Support for IPv6 PXE and USB 3.0 in the pre-boot environment.

   
   
   
   0

   
   
   
   0