Which command configures the management IP address on a WLAN controller?
A.
interface ip address 192.168.0.100 slot 1
B.
oap management-ip 192.168.0.100 slot 1
C.
management-ip address 192.168.0.100 255.255.255.0
D.
ip address 192.168.0.100 24
Explanation:
Reference:http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/k
b/docDisplay/resource.process/?javax.portlet.begCacheTok=com.vignette.cachetoken&java
x.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.rid_ba847bafb2a2d782fcbb0
71 0b053ce01=docDisplayResURL&javax.portlet.rst_ba847bafb2a2d782fcbb0710b053ce01=
wsrpresourceState%3DdocId%253Demr_na-c03719557-
5%257CdocLocale%253Den_US&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01_
ws_BI&ac.admitted=1401095294880.876444892.492883150(page 4)
Explanation :
Parameters
ip-address: Specifies the management IP address of the OAP module. This address must be
configured on the OAP module.
slot slot-number: Specifies the number of the slot where the switching engine resides. The
value of this field must be 0.
Usage guidelines
To use an NMS to manage the switching engine, you must first configure a management IP
address for the engine.
Examples
# Set the management IP address to 192.168.0.101 for the switching engine of the HP 830
Series PoE+ Unified Wired-WLAN Switch.
<Sysname> system-view
[Sysname] oap management-ip 192.168.0.101 slot 0