When using the Configure or Repair Agent capability of HP SIM 7.0, which software component is
unsupported for G7 servers and earlier?

After replacing a system board on a ProLiant BL460c G7, which steps are required to ensure that
the license status remains intact in an HP Matrix Operating Environment? (Select two.)

You need to capture the configuration and support dump of several Virtual Connect domains.
Which tool can be used to perform this action from a central system?

As an administrator, you are required to update the firmware for BladeSystem products. You have
determined that the VC firmware is later than 1.34 and that the servers within the blade chassis
already have an OS loaded on them.
What is the recommended order to update the BladeSystem products?

A customer wants to verify that all the memory DIMMs in an HP Gen 8 server are genuine HP
What will provide this information?

Which step must be done after the system board is replaced on a BL460C G6?

A customer has a c7000 enclosure that is fully populated with BL680c blades. Two months after
the initial installation, the rack initiates a thermal shutdown. When diagnosing the problem, you
find there is not enough space to get behind the unit. You pull all the units out but find no problems
with the chassis, blades, or their cooling systems.

What is a potential cause for the thermal shutdown?

How does humidity affect a data center? (Select two.)

Both the c3000 and c7000 chassis have a capacity for a maximum of six power supplies. Which
feature does the c3000 have that differentiates it?

After executing a troubleshooting plan, which tools may provide indications of a successful remedy
in step 5 of the 6-step HP Troubleshooting Methodology? (Select two.)