Refer to the exhibit.

All connections between switches are 10 Gbps. Switch is an Intelligent Resilient Framework (IRF)
group with two member. Switch2 is an IRF group with two members. Switch1 and Switch2 route all
traffic.
A network architect is designing a solution for a finance company. One of the primary applications
is a multicast application that delivers stock information to IP video screens across the site. The
network architect is seeking a multicast solution that meets these needs:
Simple configurationthat the customer’sIT staff canmanageandtroubleshoot
No singlepoint of failure for the multicast traffic
What is the best solution for this environment and these needs?

Refer to the exhibit.

The branch routers have E1 lines into the Frame Relay Service provider network. The exhibit
shows just one branch, but the network actually has 30 branches. The HP 6600 Series routers,
which are the area border routers (ABRs), have E2 lines into the Frame Relay network.
The routers in the exhibit Open Shortest Path First (OSPF). The enable OSPF on network follows:
In area 2,OSPF is enabled on network 10.2.0.0/16
In area 0, OSPF is enabledon network 10.0.0.0/16
The customer requires resilience at the WAN core. Which design change best supports that
requirement?

Refer to the exhibit.

A network architect has planned redundant links as shown in the exhibit. What should the network
architect do to ensure that the redundant link design is truly resilient?

A network architect is compiling information about the total cost ownership (TCO) for a proposal.
Which factors play a role in TCO?

Refer to the exhibit.

A network architect is designing the logical topology for a campus LAN networking solution. The
customer requires support for 2400 edge ports, which is provided by 10 intelligent Resilient
Framework (IRF) groups at the access layer. This customer does not have a wireless network nor
anticipants adding one in the next two years. However, the customer does want to authenticate
users with 802.1X and use the network RADIUS server to divide users from different groups into
different VLANs. The customer has three user groups, each of which includes between 600 and
900 users.
Additionally, the customer understands that the RADIUS server will require several policies but
wants to keep these policies as simple and easy to maintain as possible.
How can the network architect ensure that the solution meets the customer needs and also follows
best practice?

An architect is planning an HP Wired-WLAN solution for a customer with Voice over WLAN
(VoWLAN) devices, which support 5 GHz and 2.4 GHz, and the laptops. What is a potential
advantage of dual-radio 802.1n APs for this environment?

A network architect has created a quality of service (QoS) for an HP 5900 Series switch that uses
four traffic classes. Class of Service (CoS) 5 for voice traffic. CoS 4 for Video traffic. And CoS 0 for
everything else. The switch ports implement strict priority (SP) queuing.
What would be an advantage of enabling weighted fair queuing (WFQ) instead of SP?

A customer is deploying a mobility solution. The IT staff is not experienced in troubleshooting
issues with interference and radio frequency (RF) design, and the customer is worried that the
wireless connections will not be stable or will not perform well.
Which feature of HP unified Wired-WLAN solutions addresses this customer concern?

A network architect is working with a customer to implement a new network design. The network
architect has learned that the company has a legacy application hosted on a number of legacy
servers. The legacy application must remain intact and after the new network implementation. As
the company plans to continue using it indefinitely.
With which stakeholder should the network architect discuss the technical detail of the legacy
system and any challenges or specifics about maintaining interoperability?

A customer is seeking an upgrade for their campus LAN network. Currently, the customer has
access layer switches that support 18.10/100/1000 Mbps ports and one Gigabit uplink. The
customer wants better performance in the upgrade but also wants to minimize costs.
The network architect has used the Network Traffic Analyzer (NTA) for Intelligent Management
Center (IMC) to collect information about the access layer uplinks. These are the results:
For switches on Floor1,the peak utilization is650 Mbpson a Gigabit uplink. Onmost days, the
utilizationpeaks at about 400 Mbps. Peaksusually occur briefly.
For switches on Floo2,the peak utilization is800Mbpson a Gigabit Uplink. Duringactiveperiods,
the utilization often remainnear 800.
What is most appropriate plan for oversubscription in the new access layer? (For this question,
think only about oversubscription and not customer needs for redundancy)