What is the effect of the following command, entered at the CLI of an HP A9500 switch?[A9500-GigabitEthernet2/0/1] stp root-protection

You are installing HP E5400 zl Series switches at asite that requires all management sessions to be
encrypted. If the site’s administrators want to
use the web interface for configuration and management, which management protocol must be implemented to
meet these requirements?

Which privilege level is indicated by the followingprompt at the CLI of an HP E5400 zl Series switch?Switch#

You have configured a static LACP port trunk that includes ports D1-D4 on an HP E8212 zl switch.
You have added the trunk to VLAN 23 as a tagged
member. No other ports are tagged members of this VLAN. You have verified that the trunk configurationon
the switch on the other side of the trunk
is correct. How will the switch handle broadcast traffic destined for VLAN 23?

After configuring MSTP on HP switches at a customersite, you learn that users in VLAN 44 can no longer
access a server that was available
immediately before Spanning Tree was enabled. Whichstatement explains this situation?

Which A-Series CLI features are available to users with Monitor (1) level privileges but not to users with Visit (0) level privileges? (Select two.)

You have defined a link aggregation group on an HP A5800 switch. Which view should you enter to assign
ports to the group?

At a customer site, an HP PCM+ server does not automatically discover any manageable devices except those
on the subnet where the server resides.
Which configuration step is necessary to enable wider discovery?

What is the default IRF Master priority on an HP A-Series switch?

When is it necessary to configure an IP address on an HP E5400 zl Series switch? (Select two.)