HP has released a new version of an access controller software package file. How does the
network administrator activate the new software version?
A.
by interrupting the boot sequence and selecting the Update Bootware option
B.
by interrupting the boot sequence and selecting the Boot Extend Bootware option
C.
by interrupting the boot sequence and selecting the Boot Backup Bootware option
D.
by interrupting the boot sequence and selecting the Update Full Bootware option
Explanation:
Reference:http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/k
b/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=
docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDoc
Display=wsrpresourceState%3DdocId%253Demr_na-c03758463-
2%257CdocLocale%253D&javax.portlet.endCacheTok=com.vignette.cachetoken(page 28)
Explanation :
Using XMODEM to upgrade software through the console port
1. Connect the console port of the WLAN Controller to the PC that stores the new system
software image.
2. Enter 2 in the Bootware menu to access the Serial submenu. 28
=============================<Enter Serial SubMenu>======================
|Note: the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
======================================================================
====Enter your choice(0-5):
Table 9 Serial submenu options
Item Description
<1> Download Application Program To SDRAM And
Run
Download a system software image to SDRAM
through the serial port and run the image.
This option takes effect only when the password
recovery capability is enabled.
<2> Update Main Application File Update the main system software image.
<3> Update Backup Application File Update the backup system software image.
<4> Update Secure Application File Update the secure system software image.
<5> Modify Serial Interface Parameter Modify serial port parameters
<0> Exit To Main Menu Return to the Bootware menu.