How does the switch handle this packet?
An HP Provision switch is controlled by a team of HP VAN SDN Controllers and operates in hybrid OpenFlow
mode. The team has added several flow entries. A valid unicast packet arrives on the switch that does not
match any flow entries.
How does the switch handle this packet?
how many broadcast domains should the administrator create?
Refer to the exhibit.
A network administrator wants to create a routed topology that ensures redundant connections between User
Group 1 and User Group 2. Based on this information, how many broadcast domains should the administrator
create?
Which Network Protector component should the administra…
to prevent devices in the student VLAN from sending traffic with a high QoS value. Instead, all traffic in the
student VLAN should be reassigned for normal forwarding.
Which Network Protector component should the administrator use to enforce this policy?
what is the result of this MSTP configuration?
Refer to the exhibit.
All four switches run MSTP. Switch_A, Switch_B, and Switch_C are configured with this MSTP information:
– Config name = “Region 1”
– Revision number= 1
– Instance 1 = VLANs 10, 12
– Instance 2 = VLANs 11, 13
– IST instance = VLANs 1-9, 14-4094
Switch_D is configured with this MSTP information:
– Config name = “Region1”
– Revision number= 1
– Instance 1 = VLANs 10, 12
– Instance 2 = VLANs 11, 13, 14, 15
– IST instance = VLANs 1-9, 16-4094
Based on this information, what is the result of this MSTP configuration?
which additional component must be included in the solution?
A company has an HP Helion CloudSystem solution that includes HP Virtual Cloud Network (VCN). The
company is using VXLAN to create overlay networks for services deployed in the cloud. Some of these services
are deployed on “bare metal” servers, which are not virtualized.
Based on these needs, which additional component must be included in the solution?
Which configuration should the administrator apply for …
A network administrator configures OSPF in an HP ProVision based network. The administrator is concerned
that a rogue device might connect to an access layer switch and introduce OSPF routes to the company’srouting topology.
The access VLANs do not contain additional routers.
Which configuration should the administrator apply for these access VLANs to prevent them from forming an
adjacency with rogue devices?
How can OpenFlow 1.3 accommodate these actions?
A company plans to develop an SDN application in-house. The application will implement complex policies that
make forwarding decisions, as well as set priorities and rate limits for various types of traffic. How can
OpenFlow 1.3 accommodate these actions?
How does the administrator set up the solution to meet …
A company requires switches to use Multiple Spanning Tree Protocol (MSTP) instead of Rapid Spanning Tree
Protocol (RSTP), so that the switches can forward traffic on more than one switch-to-switch link. How does the
administrator set up the solution to meet this requirement?
Which technology allows the company to implement an SDN…
A company wants to implement an SDN solution that provides a programmable interface for its data center.
The company values interoperability, so the solution should not be tied to a particular vendor.
Which technology allows the company to implement an SDN solution that meets these requirements?
what else must the administrator configure to make the …
A network administrator adds a new VLAN in a campus network, VI.AN 120. The administrator needs to set up
a DHCP scope for this VLAN. The scope will include an IP address for DHCP clients and a default gateway
address. An HP Comware aggregation layer switch acts as a DHCP server for this VLANs at the access layer.
The administrator configures this on the Comware switch for the new DHCP scope:
Based on this configuration, what else must the administrator configure to make the pool available to DHCP
clients that send requests in VLAN 120?