What must be configured before a storage integrator can start creating volumes from the available space on an
What must be configured before a storage integrator can start creating volumes from the available space on an HPE MSA 1040/2040? A. disk group B. snapshot space C. date and time on MSA storage D. global spare disk
Which network-related information may be needed for the implementation?
A storage integrator is planning an HPE StoreVirtual VSA installation. Which network-related information may be needed for the implementation? A. DHCP reservation for virtual IP address of the StoreVirtual cluster B. jumbo frames need to be enabled for iSCSI traffic C. flow-control needs to be disabled when using 10Gb NICs D. virtual IP address for […]
How can this goal be achieved?
A storage integrator wants to change the tiering affinity of an existing volume on an HPE MSA 1040/2040 with GL220 and higher. How can this goal be achieved? A. Change volume tier preference of the volume. B. Migrate volume using new tiering settings. C. Perform a clone operation with a new automatic tiering rule. D. […]
Which port can be used to connect the HPE MSA 2040 controller to hosts?
Refer to the exhibit. Which port can be used to connect the HPE MSA 2040 controller to hosts? A. 4 B. 5 C. 6 D. 8 Reference: https://support.hpe.com/hpsc/doc/public/display?docId=c03792322 (10)
Which PDU do you recommend to meet this requirement?
Your customer has a requirement to provide identification information to the PDU such as server name, UUID number, and IP address from their ProLiant-based storage products. Which PDU do you recommend to meet this requirement? A. HPE G2 Metered PDUs B. HPE Intelligent PDU C. HPE G2 Metered and Switched PDU D. HPE Standard Series […]
For which default accounts will the storage integrator need to hand over changed passwords to the customer?
A storage integrator installed an HPE 3PAR StoreServ system. For which default accounts will the storage integrator need to hand over changed passwords to the customer? A. 3parcust. 3paradm B. cpmaint, spmaint C. root, 3paradm D. root, console Reference: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00006417en_us
Which information does the engineer need from the customer to do the integration, using the Insight Remote Sup
A system engineer installed HPE Insight Remote Support for an HPE MSA 2042 storage system at a customer’s site. The engineer wants to integrate the system in HPE Insight Online to monitor it remotely. Which information does the engineer need from the customer to do the integration, using the Insight Remote Support GUI with HPE […]
A storage integrator is examining the configuration of an HPE 3PAR storage system using CLI. Which command can
Refer to the exhibit. A storage integrator is examining the configuration of an HPE 3PAR storage system using CLI. Which command can be used to display a list of common provisioning groups starting with substring R5 in the system? A. showcpg R5* B. cpg show | grep ^R5 C. cpg | grep R5* D. cmore […]
Which steps are part of the verification process?
A storage integrator is validating an HPE 3PAR StoreServ implementation. The integrator created a volume in the HPE 3PAR StoreServ Management Console (SSMC) and needs to verify read/write access from a Linux operating system. Which steps are part of the verification process? (Choose two.) A. Select Hosts under the Servers menu section, and click Create […]
What considerations must be taken into account to allow for Catalyst replication?
A customer has HPE Data Protector and a StoreOnce VSA at a remote site that must replicate to the corporate data center StoreOnce backup device. What considerations must be taken into account to allow for Catalyst replication? A. Data Protector Catalyst replication will rehydrate the data on the StoreOnce VSA then write to the data […]