HOTSPOT
Watch the modules for HP Intelligent Management Center (IMC) to the profile of the customer who needs that solution.

HOTSPOT
HP data center access layer can use top of rack (ToR) switches or End of Row (EoR)/ Middle of
Row (MoR) switches. Select the design with advantage.

A customer has a policy of using open standard protocols to maintain the flexibility to use multiple
vendors. Which protocols are open standard (three.)

HOTSPOT
A network architect is choosing transceivers for switches-to-switches fiber links. Which factors
affect the architect’s choice?

The customer plans to connect 40 Voice over IP (VoIP) phones and 8 security cameras to a
switch:
The VoIP phones are Class 2 devices and require a maximum of 4.5W (draw 5w)
The security cameras are Class 4 devices and require a maximum of 17W (draw 20W)
The network architect is proposing switch that supports PoE and PoE + and has a Poe Power
budget of 370W.
The architect proposes the usage from of power allocation. What are the advantages and
disadvantages of this proposal?

An architect is planning an HP Wired-WLAN solution for an office with approximately 4000 users.
The solution will have 256 MSM460 APs WLAN controllers. Users must be able to roam
seamlessly around the site.
Which strategy meets these needs?

A customer prefers fixed-port switches at the campus access layer. The network architect wants to
propose access layer switches simplifying network architecture and network management.
Which technologies should the network architect consider? (Select two.)

Which application might drive a company to invest in a campus LAN topology that offers lower
latency for east/west?

A company experienced a denial of service attack when an infected employee device connected
to the network. Which secret devices and prevents them from accessing the network?

The exhibit shows the topology for a network with 30 access layer switches (only two are
shown).Every switch-to-switch link is a Gigabit link. Every area network (VLAN) interface runs.
Open Shortest Path First (OSPF) and has the IP address shown in the exhibit. The other interface
settings are defaults.

The access layer switches support several more VLANs not shown in the exhibit and also run
Multiple Spanning Tree protocol (MSTP) loops.

What is one recommendation for enhancing convergence time and resiliency for this solution?