Refer to the exhibit.

A network architect is designing the logical topology for a campus LAN networking solution. The
customer requires support for 2400 edge ports, which is provided by 10 intelligent Resilient
Framework (IRF) groups at the access layer. This customer does not have a wireless network nor
applications adding one in the next two years. However, the customer does want to authenticate
users 802.1X and use the network RADIUS server to divide users from different groups into
different VLANs. The customer has three user groups, each of which includes between 600 and
900 users.
Additionally, the customer understands that the RADIUS server will require several policies but
wants to keep these policies as simple and easy to maintain as possible.
How can the network architect ensures that the solution meets the customer needs and also
follows best practices?

Refer to the exhibit.

Employees connect on wired connections, which are secured with 802.1X. Employees can also
connect to a WLAN that enforces Wi-Fi Protocol Access 2 (WPA2) and 802.1X authentication.
The customer wants users to be assigned to different VLANs based on their Active Directory user
groups.
Each of the 14 users groups includes between 100 and 200 users. The customer expects only
several hundred concurrent wireless users, who might move around the site.
How can the architect make this design seamless roaming between access points (APs)
connected in different locations?

A network architect is designing a Fibre Channel (FC) SAN solution for a company. The network
architect needs the number of inter-switch links (ISLs) between FC switches relative to the
number of connections to the servers.
Which statement correctly describes the consideration for this decision? (Select two)

A physical server connects to two Fibre Channel (FC) switches. The server supports eight virtual
machines (VMs) with VMware version 5.1. The VMs need to be zoned and given access to remote
storage on an individual basis.
Which feature must the network architect ask the SAN administrators to enable FC ports?

A customer is seeking an upgrade for their campus LAN network. Currently the customer has
access layer switches that support 48 10/100/1000 Mbps ports and one Gigabit uplink. The
customer wants performance in the upgrade but also wants to minimize costs.
The network architect has used the network Traffic Analyzer (NTA) for intelligent Management
Center (IMC) to collect information about the access layer uplinks. These are the results:
For switches on Floor1,the peak utilization in 650 Mbps on a Gigabit uplink.On most days, the
utilization peaksat about 400 Mbps. Peaks usuallyoccur briefly.
Forswitches on Floor 2, thepeak utilizationis 800 Mbpson a Gigabit uplink. During active period,
the utilizationoften remains near 800.
Which is the most appropriate plan for oversubscription in the new access layer? (For this
question, think only about oversubscription and not customer needs for redundancy)

A physical server has 6 NICs and supports eight virtual machines (VMs). NIC 1 and NIC 2 connect
the VMs to the data Center LAN. The two NICs are intended to provide load balancing and
redundancy (the other NICs are used for purposes not relevant to this question) VMs 1 through 5
belong to VLAN 10. VMs 6 through 8 belong to VLAN 20.
What is a proper way to set up the switch or virtual switches?

Refer to the exhibit.

A customer is gradually moving to an IPv6 environment. Currently, the customer needs an IPv6
application in Zone A to communicate with the server for the application in Zone C.
Which solution meets the need and also queries configuration changes to the fewest number of
infrastructure devices?

A network architect has planned several validation tests and user acceptance tests (UATs) for a

new HP solution.
In order to ensure meaningful results, what is one step that the network architect should complete
before implementing the new solution?

A network architect is compiling information about the total cost of ownership (TCO) for a
proposal. Which factors play a role in TCO?

Refer to the exhibit.

Which level of SAN availability does this design fulfill? (The levels are listed from 1 to 4 Level 1 is
the lowest, and level 4 is the highest)