A customer in the Life Sciences field has an existing 10GbE infrastructure and wants to integrate
the HP Storage X9300 Gateway connected to an EVA4400 Storage Array. The X9300 will connect
through two stacked A-Series ProCurve switches to approximately 100 compute nodes over NFS.
The customer also has ten Windows 2008 clients that need to read archived medical records over
a CIFS connection. These clients authenticate through a Windows 2008 Active Directory. The
environment is backed up through a Data Protector 6.1 configuration connected to an ESL Eseries tape library.

What do you need to consider when upgrading the firmware’?

HOTSPOT
You are managing a D2D2G04i. You receive a message from HP indicating that a new firmware revision is available.
Click on an area on the D2D management interface that allows you to update firmware for the device.

HOTSPOT
You are managing a site that has multiple EVAs. A new P6000 array is added to the environment
and you need to implement. Thin Provisioning for all volumes in the new array Several volumes
have been created and you must determine if they are thin provisioned.
Click on the screen area that provides this information for Vdisk00l.

HOTSPOT
You are managing an environment with HP BladeSystem and P4000. You notice that your
applications are liming out and are getting intermittent connections to the storage environment.
When you check the error logs on the Virtual Connect modules, you find this error:
2009-03-31T14:22:08-05:00 [ENET:2:3023:Major] Enet Module state NO_COMM : Cannot
communicate with component
Click on the hardware component in the GUI that is generating this error