Which vSphere configuration menu must be used in order to enable iSCSI functionality for communication with a
Which vSphere configuration menu must be used in order to enable iSCSI functionality for
communication with a P4000 network using vSphere4?
Which switch configuration for B-Series switches must be used in an HP Continuous Access EVA environment for a
Which switch configuration for B-Series switches must be used in an HP Continuous Access EVA
environment for all Fibre Channel switches in the path from the source array to the destination
array when the HP-FC protocol is used? (Select two.)
Which type of port supports the stacking of SN6000 Fibre Channel switches while preserving SFP ports for devic
Which type of port supports the stacking of SN6000 Fibre Channel switches while preserving SFP
ports for devices?
which wizards are available to allow you to quickly and easily set up the system?
In the Storage Management Utility for a P2000 G3, which wizards are available to allow you to
quickly and easily set up the system? (Select two.)
Which Common Provisioning Group option combination should be implemented for this environment?
You are installing an Oracle environment for your customer. They have purchased an HP 3PAR
T400 with 4 nodes and 16 chassis to provide shared storage. They need to be cost sensitive while
protecting the data and maintaining performance. Which Common Provisioning Group option
combination should be implemented for this environment?
Which commands are used to determine the status of trunking on B-series switches?
Which commands are used to determine the status of trunking on B-series switches? (Select two.)
Where can you find the DHCP-assigned IP address on your D2D system during initial configuration?
Where can you find the DHCP-assigned IP address on your D2D system during initial configuration?
Which port mode must be selected in order to access data and management traffic using different networks?
A customer wants to integrate a P4500 Multi-Site SAN Solution in their environment. Currently,
their infrastructure consists of two EVA systems. The customer has 18TB of Tter-1 and 6TB of
Tier-2 data, which need different performance and availability levels.
You design a P4000 Virtual SAN Appliance (VSA) solution on VMware vSphere4 with one DL380
G7 in each datacenter to utilize existing EVA disk space for the Tier-2 data.
You recommend an HP D2D Backup System and HP Data Protector for a backup solution. You
design a dedicated iSCSI network for the D2D and P4000 solution.
Which port mode must be selected in order to access data and management traffic using different
networks?
which B-series devices?
Virtual Fabrics is supported on which B-series devices? (Select two.)
Which P2000 G3 Combo FC/iSCSI controller ports would be most suitable for replicating snapshots to remote loca
Which P2000 G3 Combo FC/iSCSI controller ports would be most suitable for replicating snapshots to
remote locations?