Refer to the exhibit.

These three routers are currently configured for BGP. They do not apply any routing policy in
terms of BGP on routes or attributes advertised to an received from peers. How can the network
administrator for Router 1 cause Router 1 to advertise 192.0.2.0/24 to Router 2 and Router 3?

A company needs a simple authenticate solution for guests. The HP Comware access layer
switches will implement portal authentication (or Web-Auth). The network administrator wants the
switch to host the login web page on an IP address that not used for any other purpose.
What should the administrator do to accomplish this goal?

Refer to the exhibit.

A network administrator up a remote mirroring on the HP Comware switches in the exhibit. The
administrator must define several port while entering mirroring-group commands on these
switches. Which port should be the reflector port (sometimes called monitor-egress port)?

Two HP 10500 Series Switches connect on a 10G fiber link. One of the two fibers in the link
breaks, and a broadcast storm occurs. How could a network administrator prevent a problem like
this from happening again?

HP Comware Switch 1 connects to switch 2 on GigabitEthernet 1/0/1. Swutch 2 implements an
inbound rate limit of 600 Mbps. The network administrator wants switch 1 to buffer traffic that
exceeds the Switch 2 rate limit of 600 Mbps and send the traffic at 600 Mbps. All traffic has the
same 802.1p priority and is forwarded in priority queue 2.
What should the administrator apply to the Switch 1 interface GigabitEthernet 1/0/1?