What should you use to update firmware on several HP VC Ethernet or Fibre Channel modules
simultaneously?

What is needed to support Dynamic Power Capping at the enclosure level?

A customer has a c7000 enclosure that is fully populated with ProLiant BL680c server blades. Two
months after the initial installation, the rack initiates a thermal shutdown. When diagnosing the
problem, you find there is not enough space to get behind the unit. You pull all the units out but
find no problems with the chassis, blades, or their cooling systems.
What is a possible cause for the thermal shutdown?

You replaced a Smart Array P812 in a ProLiant DL380 G7 storage server. What should you do
next?

Which Onboard Administrator GUI virtual power button command powers the server on and off
gracefully?

Which HP tool is used to configure NIC teaming on a Windows server?

What happens when you mix low-reduced DIMMs (LRDIMM) and unbuffered DIMMs (UDIMM)?

A customer is using a c3000 enclosure and wants to install a redundant Onboard Administrator
(OA). What should the customer change in the existing enclosure to support the additional OA?

HP standard warranties support HP hardware. What are HP Care Packs designed to support?

A c7000 enclosure is fully populated with power supplies. Each power supply will have 2400W
available if the N+1 power mode is configured.
What is the total amount of available power in the enclosure?