You are reviewing a colleague’s design for a new storage environment. The solution consists of
two HP 3PAR StoreServ arrays. The colleague also proposes an HP Multi-protocol Router Blade
for the B-Series to extend the fabric.
Which customer requirements should lead you to choose an HP MPX200 Multi-protocol Router as
an alternative? (Select two.)

You are working with a customer to design and install a Fibre Channel storage solution based on
HP 3PAR StoreServ Storage.
The customer wants data migration to be part of the solution. The IT environment includes
VMware vSphere 5 and Windows 2008 R2 servers.
The customer intends to utilize the existing non-HP array for Tier 2 storage on the Windows 2008
R2 servers.
The existing array is also being used as the target of the customer backups. and that data will not
be migrated.

The customer wants to capitalize on their previous purchases and spend as little as possible for
data migration.
What should you recommend the customer use to migrate the data? (Select two)

You are sizing a solution based on performance requirements.
How do you calculate the number of front-end I/ Os versus back-end I/O when doing single writes?
(Select three.)

An existing environment contains a two-node HP 3PAR StoreServ 10400 storage array with
approximately 60 TB of capacity spread across three tiers. The customer plans to replicate their
business critical data to a remote DR site. The customer cannot afford to lose any of this data. You
propose that the customer install an HP 3PAR StoreServ 7400 Storage system at the DR site.
The CFO does not want the remote equipment to sit idle, so the customer will use that equipment

for data mining. The results must be replicated back to the main site. The customer also requires
that the replication of the data mining results have zero impact on the data mining performance.
Which HP 3PAR technology enables the proposed solution to meet the customer requirements?

Your customer has a number of existing HP P4500 clusters across two sites. They are installing a
new upgraded HP StoreVirtual 4000 environment, with new management groups. The new
environment consists of:
– HP B|adeSystem c7000 enclosures with HP Virtual Connect Flex-10 modules
– HP ProLiant BL460c Server Blades running VMware vSphere and Windows 2008 on physical
server systems
– HP StoreVirtual 4430
– Cisco Nexus 5000 switches
The HP Virtual Connect Flex-10 modules connect to the switches in three 10Gb shared uplink
sets. The storage connects to the switches via 10Gb. During a design meeting for the new
environment the customer asks for the method with the least amount of downtime to migrate the
data for their physical servers to the new storage arrays.
Which method should you suggest?

You are designing a storage solution for a customer who has three data centers on a campus and
a 10Gb/s network infrastructure. The business requirements state that a complete site failure must
be tolerated. You propose six HP Storevirtual 4530 nodes split evenly between the sites.
Which Network RAID level should you recommend to the customer to meet their business
availability needs?

Your customer has two data centers in a campus. The environment consists of:

—-
HP BladeSystem c7000 enclosures with HP Virtual Connect Flex-10 modules
HP ProLiant BL460c Server Blades
HP Storevirtual 4430
HP 5900 Switches
The HP Virtual Connect Flex-10 modules connect to the switches in three 10Gb Shared Uplink
sets. The storage connects to the switches via 10Gb. The customer wants to migrate their network
to a flat architecture and simplify managements.
What should you implement to meet the customer requirements?

A NetBackup customer needs to improve the RTO after a disaster is declared at the primary data
center. They have failed several disaster recovery audits because of extended recovery times You
recommend that they replace tape library with an HP StoreOnce Backup System that replicates
the primary data center backups to the remote site.
Which device interface provides the lowest RTO?

A customer has an environment spanning two data centers in a campus environment The primary
storage is an HP 3PAR StoreServ 10400 System. Data is replicated between existing sites with an
RPO of zero. There has recently been a hurricane and extensive flooding. While the customer was
not directly impacted they are now questioning whether they have adequate protection. You have
been brought in to analyze the customer environment and make recommendations. You suggest
creating a data center at a remote location and actively replicating the data to it.
Which HP 3PAR replication solution meets the customer requirements?

Your customer has an existing HP LeftHand P4500 SAN with four nodes. They have deployed the
array to feed latency-sensitive high-definition video traffic to their student population around the
campus The array complies to HP best practices and has a physically dedicated iSCSI network
comprising of two 1Gb HP ProCurve 2920 Switches. Jumbo frames are enabled.
The customer asks you to investigate reported performance issues. Which quick-fix solution
should you suggest before running in-depth performance analysis?