Which HP tools should you use to determine that an SSD drive has degraded as a result of a large number of wri
Which HP tools should you use to determine that an SSD drive has degraded as a result of a large
number of write operations? (Select three.)
Which tool can you use to verify that SNMP events appear in HP SIM from a server blade running Windows 2008?
Which tool can you use to verify that SNMP events appear in HP SIM from a server blade running
Windows 2008?
What should you check to verify that the physical hardware connectivity is connected?
After you replace the system board in ProLiant BL460c GB server blade, the server cannot
connect to an external shared storage through the SAS interface. Other similar servers in the
same enclosure are in working condition. What should you check to verify that the physical
hardware connectivity is connected?
Which tool can report the amount of life remaining in an HP solid state drive (SSD)?
Which tool can report the amount of life remaining in an HP solid state drive (SSD)?
Which type of port is typically used to support endusers on an A-Series switch?
Which type of port is typically used to support endusers on an A-Series switch?
Match each A-Series router with its description.
DRAG DROP
Match each A-Series router with its description.
What must you do to enable communications between hosts in the two VLANs?
Refer to the Exhibit.
You have defined VLAN 5 and VLAN 6 on an HP E5406 zl switch. You have added four ports to each VLAN as
untagged members.
All other switch settings are at defaults. What must you do to enable communications between hosts in the two
VLANs?
how will they converge?
Refer to the Exhibit.
The two switches in the exhibit are directly connected and have been pre-configured for MSTP.
When Spanning Tree is enabled
on the switches, how will they converge?
What is the default status of LLDP on an HP E5400 zl Series switch?
What is the default status of LLDP on an HP E5400 zl Series switch?
What is the effect of the following command?
The IP route table of an HP E5406 zl Series switch includes a route for 10.5.0.0/16 with a gateway of
192.35.35.1. What is the effect of the following command?
Switch(config)# ip route 10.5.1.0/24 172.42.42.3