A company has a data center that hosts multiple tenants. The company is adding a second and third data center. The core of each data center is an IRF
virtual switch.
These are the IRF connections:
IRF 1 is the core of the first data center.
IRF 2 is the core of the second data center.
IRF 3 is the core of the third data center.
The three data centers are fully interconnected with dark fiber.
IRF 1, IRF 2, and IRF 3 have connections to a WAN and to the Internet.
Which option for the connections between the data centers provides the best resiliency and stability?

Refer to the exhibit.

A network administrator wants to connect four data centers using HP EVI. What is the correct setup for the EVI tunnel interfaces?

Refer to the exhibits on the Exhibit 1 and Exhibit 2 tabs.
Exhibit 1

Exhibit 2

Network clients are configured to use the switch as their default gateway in VLAN 2. The HP Comware switch places VLAN 2 in OpenFlow instance 1.
An SDN application has created the flow entry shown in Exhibit 1 to route traffic from 10.1.2.0/24 to 10.1.3.0/24. Exhibit 1 does not show the output
interface for the flow.
Which output interface supports the needs of this scenario?

Refer to the exhibits on the Exhibit 1 and Exhibit 2 tabs.
Exhibit 1

Exhibit 2

A network administrator has set up an HP VAN SDN Controller to operate in hybrid mode. The administrator wants to confirm that the controller has
properly configured an HP Comware switch to be controlled by it in hybrid mode. Which output in the exhibit indicates that the controller is using hybrid
mode.

What correctly describes the role of OpenFlow in an SDN solution?

Refer to the exhibit.

A network administrator is setting up the OSPF routing for VPN instance “TenantA.” The configuration shown in this exhibit is not functioning as
expected. What must the administrator do to correct the configuration?

A company is using HP Network Visualizer to monitor traffic transmitted and received by users in specific Active Directory user groups. The company
wants to send traffic to a different server from the controller and have that server store the captured packets in PCAP format. How would the network
administrator configure this solution to meet these requirements?

An SDN application submits a username and password to authenticate to the HP VAN SDN Controller, which is configured for local authentication. If the
username and password are valid, what does the controller do?

Which technology is best suited for isolating tenants within a data center that must support many tenants?

A network administrator is setting up OpenFlow settings on an HP ProVision switch with VLANs 1, 2, 3, and 4. The switch reaches the HP VAN SDN
Controller on VLAN 1. The administrator wants to enable OpenFlow on VLANs 2 and 3 but not on VLAN 4.
What is a valid configuration for the OpenFlow instances?