View the exhibit.

The switches shown in the exhibit are HP Provision ASIC switches. Switches A, B, C, and D
implement MSTP using the settings shown in the exhibit. Switches B and C also connect to a
switch at the core, switch E, on dedicated VLANs that act like routed links. The network
administrator is not certain how or whether switch E implements MSTP. Which action should the
administrator take to prevent issues with the connection to the core?

View the exhibit.

An HP 5406 zl switch is configured as shown in the exhibit. The switch receives a frame on VLAN
10, destined to UDP port 5555. The frame is marked 802.1p value 6 and DiffServ value 46. Note
that queues are numbered 1-8, not 0-7. In which queue does the switch forward the traffic?

A company wants clients to receive a video stream from a server. What is the advantage of
transmitting this stream as multicast traffic rather than unicast traffic?

View the exhibit.

A network administrator configures the HP 2610-24-PoE switch as shown in the exhibit.
Computers belong to the data VLAN, which is VLAN 10. IP phones should transmit traffic on VLAN

20. They should be able to connect to any port and use LLDP-MED to obtain their VLAN
assignment. However, IP phones connected to this switch cannot reach the VoIP server and are
not functioning correctly. IP phones connected to other switches are functioning correctly. What
must the network administrator do?

View the exhibit.

Several HP Provision ASIC switches are implementing PIM. Based on the configurations shown in
the exhibit, which switch is included in the dynamic RP set?

View the exhibit.
Exhibit 1

Exhibit 2

A network that handles IPv6 multicasts and the hosts that have joined particular IPv6 multicast
groups is shown in Exhibit 1. Routing switch B is acting as the MLD querier, and routing switch A
implements MLD snooping, as shown in Exhibit 2.
An IPv6 multicast packet for FF14::1 arrives on routing switch A on port B1. On which ports does
the switch forward the packet?

A company’s HP Provision ASIC switches are configured to use PIM-SM mode to provide
multicast services. When an HP Provision ASIC switch receives a multicast stream, it determines
that the best path to the multicast source is not through the Rendezvous Point (RP). Which action
might this switch take?

If you use the MAC lockout feature to block a specific MAC address on an HP 3500zl switch,
which traffic is dropped?

View the exhibit.

A network administrator has activated connection rate filtering on an HP 8200 zl Series switch with
the throttle action and medium sensitivity. However, a server connected to port A1 in VLAN 10 (IP
address 10.1.10.10) needs to establish many connections with other backend servers as part of its
typical behavior. The ports that this server uses are TCP 50000-50020.
Based on the information provided in the exhibit, how can the network administrator ensure that
this traffic is never blocked while leaving the current protections in effect?