A network administrator needs to replace an antiquated access layer solution with a modular solution involving
A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes. Which solution should the administrator implement? A. AOS-CX 8325 B. AOS-CX 6300 C. AOS-CX 6400 D. AOS-CX 8400 Reference: https://andovercg.com/datasheets/aruba-cx-8325-switch-series.pdf
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches? A. Only a traffic rate and burst size can be defined for a queue B. Limits can be defined only for broadcast and multicast traffic C. Rate limiting and egress queue shaping can be used to restrict inbound traffic D. Rate limiting […]
Which statement is correct regarding ACLs and TCAM usage?
Which statement is correct regarding ACLs and TCAM usage? A. Applying an ACL to a group of ports consumes the same resources as specific ACE entries B. Using object groups consumes the same resources as specific ACE entries C. Compression is automatically enabled for ASIC TCAMs on AOS-CX switches D. Applying an ACL to a […]
What are two OSPF attributes within the hello messages that must match to successfully establish neighbor rela
What are two OSPF attributes within the hello messages that must match to successfully establish neighbor relationships? (Choose two.) A. Router ID B. Priority C. Hello and Dead intervals D. Area ID E. Process ID
After completing the above commands, what is the expected output of show vlan with no other vlan commanded hav
The section in blue can be ignored. SW1(config)# interface 1/1/1-1/1/2 SW1(config-if-
Which statement is true regarding how Switch-A will forward the packet?
Refer to the exhibit. The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2. Which statement is true regarding how Switch-A will forward the […]
What are two features of the three-tier designs?
What are two features of the three-tier designs? (Choose two.) A. removes the distribution layer in favor of a spine-leaf design used in modern data center deployments B. adds a distribution layer to free up resources from the Core for improved performance and routing throughput C. a more scalable design over by leveraging a distribution […]
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
Refer to the exhibit. The Aruba 8400 in the exhibit is member 2 of a VSX stack. Which command will enter the interface sub configuration mode for the port, indicated by the orange square? A. 8400(config)# interface 2/4/15 B. 8400(config)# interface 1/7/16 C. 8400(config)# interface 1/4/15 D. 8400(config)# interface 2/3/17
What is the default password that is required for the admin account while under the Service OS console?
ServiceOS login: admin SVOS> password Enter password: ******** Confirm password: ******** The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above. What is the default password that is required for the admin account while […]
What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?
Refer to the exhibit. What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface? A. Use the command ping 10.1.1.254 vrf mgmt B. Use the command ping 10.1.1.254/24 C. Change the Core-1 management address to 10.1.1.1/25 first D. The destination 10.1.1.254 requires configuring a static route