An administrator is performing maintenance on a storage array used by a DRS cluster. The administrator wants to disable alarm actions for the cluster while the maintenance is taking place.
What procedure will accomplish this task?
A.
Go to the alarms tab for each ESXi host in the DRS cluster. Locate storage-related alarms. Right click and disable each alarm
B.
Right-click the DRS cluster and select Alarm and Disable Alarm Actions
C.
Right-click the datacenter containing the DRS cluster. Select Alarm Disable Alarm Actions
D.
Go to the alarms tab for the datacenter containing DRS cluster. Locate the storage-related alarms.
Right-click and disable each alarm.
Explanation:
Using a production environment I can see what is the correct answer.
B is right answer. please check and change if correct
0
0
The question never states if the alarms where configured at the datacenter or drs level in the first place, which would dictate where the alarm would be disabled.
0
0
I agree the answer is B.
For Kahlan Thoms, I would prefer to disable the alarm at the most precise point. As the question says that the Storage array is used in a cluster, I would disable at the cluster level, if it had been written that the array would be used at the datacenter level, the disable would have been done at the datacenter level
0
0
Yes, I also checked it. The answer should be B.
Thanks all.
0
0