The remote console performance for a virtual machine on an ESXi host appears to be degraded.
What are two possible causes of the problem? (Choose two.)
A.
The virtual NIC assigned to the virtual machine has a speed or duplex mismatch.
B.
The physical NIC assigned to the virtual machine port group containing the affected virtual machine has a speed or duplex mismatch.
C.
The physical NIC assigned to the Service Console port group has a speed or duplex mismatch.
D.
The physical NIC assigned to the VMkernel port group has a speed or duplex mismatch.
Shouldn’t the answer be A and B?
0
0
You can not set the Virtual NIC speed/duplex in ESXi so A is wrong.
Remote console is display by using the management port group that is VMkernel so D is correct
B is correct ?
If Physical NIC is use by VM Port Group has some Problem then there should be no remote console performance degradation so i am douted on B
0
0
I think it should be A and D. No physical port can be assigned to VM, but has to be vnic.
0
0
The remote console is accessed thru the management port which uses a VMKernel port, so D is correct.
Since you can access a remote console for a VM that’s connected to a vSwitch that has no uplinks, B & C are incorrect.
That leaves A as the only other possible choice. HOWEVER….
My experience is that you can access a VM’s remote console when all of it’s vNICs are disconnected! So the vNIC is not involved at all with the remote console.
So it looks like D is the ONLY correct answer.
0
0