Refer to the Exhibit.

A portion of your network has three networks: NET1, NET2, and NET3.

All clients on NET2 have the default route set to 192.168.1.1.

All clients on NET3 have the default route set to 192.168.3.1.

Clients on the NET2 network are NOT able to reach any of the clients on NET3. You are given the following output of the netstat -rn command from Sys11:

# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
——————- ————- ——- —– —– ———–
192.168.3.0 192.168.3.1 UG 1 0
192.168.1.0 192.168.1.1 U 1 191 hme0
192.168.2.0 192.168.30.2 UG 1 0
192.168.30.0 192.168.30.31 U 1 176 qfe0
224.0.0.0 192.168.1.1 U 1 0 hme0
127.0.0.1 127.0.0.1 UH 1 3 lo0

Which entry is incorrect?

A.
192.168.3.0 192.168.3.1 UG 1 0

B.
192.168.2.0 192.168.30.2 UG 1 0

C.
127.0.0.1 127.0.0.1 UH 1 3 lo0

D.
192.168.30.0 192.168.30.31 U 1 176 qfe0

E.
224.0.0.0 192.168.1.1 U 1 0 hme0

F.
192.168.1.0 192.168.1.1 U 1 191 hme0